Mobil univis n (emergency n series)

Hydraulic oil

Product overview

The n series of oils are high performance anti-repeated hydraulic fluids for various needs of hydraulic equipment. The product's high viscosity index, its low temperature and its high temperature. For equipment requiring start-up and operation under various temperature conditions, the shear stability of the ewe-n series can be used in high-pressure, high-temperature operating environments over the long term. The useful life of the oil/filter can be extended and the equipment protected, thereby reducing maintenance and repair costs and the cost of waste oil treatment. The base oils and carefully selected additive formulations of the quality of the eugenic n series of oils are therefore of a nature to prevent wear and tear, to protect against rust and corruption, to emulsify, and to resist oxidation, foam and air. These oils are used exclusively for systems operating under medium conditions and requiring a high level of protection against wear and tear。

 

I don't know. Effort n series hydraulic fluids can reduce wear and tear, thereby extending the operating cycle and reducing maintenance costs. Resisting oxidation and thermal stability can safely extend the useful life while controlling oil sludge and sediment formation. The flow properties of the eugenic n series at low temperatures, protective properties at high temperatures

• High viscosity index, steady cut, low viscosity point that can be maintained for a long time, mobility at low temperatures
• Air release fast, foam control and water separation to ensure high performance and hydraulics shun. Yes
• Protection from corrosion and reduction of water impact on system components
• Effective oxidation resistance and heat stabilization, reduced sedimentation and improved valve performance

 

Application scope

• G. A. N. Could be widely used in industries, cars and ships
• A system operating at low temperatures and high temperatures
• Hydraulic systems using wear-resistant hydraulic fluids
• There are gears and bearings, which require lubricant to have a moderate wear-resistant system
• High load tolerance and wear-resistant systems
• Where water exists and requires preservation control
• Machines using various components made of different metal materials

 

Specifications and approvals

 

The eugenic n series meets or is required to:

Din 51524-3 2006-9  XXXIso l-hv (iso 11158, 1997)  XXX

 

 

 

Exxonmobil recommends univis n series products for the following application requirements: 1522324668

Denise hf-0  XXXEaton i-286-s  XXXEaton m-2950-s  XXX

 

 

Specific requirements may vary. Please contact your local exxonmobil technology. Expenditure

 

Typical

 

Univís n 15 univis n 22 univis n 32 univis n 46 univis n 68

Iso viscosity level1522324668Viscosity, astm d 445, cst@40°c     Cst@40°c1522324668Cst@100°c3. 835. 036. 398. 1911. 0Sticky index, astm d 2270151151151152151Bulder viscosity40080017403240- whatCopper corrosion test, astm d 1301a1a1a1a1aRusty test, astm d 665bPassPassPassPassPassInclination, °c, astm d 97-51- forty-eight- forty-eight- forty-eight- forty-twoFlash, °c, astm d 92174186208216222Anti-emulsification test up to 3 ml emulsifier time@54°c, astm d 1401, minute (large)101051010Density @15°c, astm d 1298, kg/l0. 8570. 8650. 8760. 8750. 879