Scalancepats sk-300 synthetic high-temperature lubricant overview: the product is made of specially dense synthetic oils, with a variety of additives such as extreme pressure resistance to grinding, rust resistance, and antioxidation. The product has excellent heat tolerance and oxidation resistance, avoiding the loss of grease while operating at high temperatures. The product is highly pressurized, resistant to grinding and carrying, which reduces gear wear. Products are more adhesive and can overcome high-rotation centrifugal power and are not easily dumped at high speed. Purpose: lubrication and noise reduction for snails and snails under high temperature, high speed and high load conditions. And the lubrication of electric gears and bearings, such as electromagnetic mixing in steel furnaces, the front of the furnaces, steel tanker cranes, etc. Applicable temperature range: -50 ~300 °c. The use of ambient temperatures of more than 280°c contains solid lubricants for lubrication. Main quality indicators: item typical data test method black smooth and flat oil ointment ointment dippoint °c not less than 340 gb/t3498 job cray entry, 0. 1 mm 265-295 gb/t 269 corrosion (t2 copper tablet, 100 °c, 24h) level copper tablets gb/t 7326 beta water irradiation (38 °c, 1h), level not greater than 5 sh/t 0109 evaporation (99 °c, 22h), % not greater than 2. 0 gb/t7325 oxidation, pressure reduction, mpa is not greater than (99 °c, 100h, 0. 760 mpa) 0. 070 sh/t 0325 four ball test, burn load, n not less than 400 sh/t02 note: 1, please contact me with the company to develop a technical solution. 2. Lubricose products shall be placed in rooms with good ventilation and appropriate temperature. The hood should be heavily protected from mixing, such as sand and dust, and should be covered in a timely manner. 3. Dust and clean the lubricated face at the time of use and must not be mixed with other greases. If there is a small amount of permeable oil in the grease, it can be used independently and evenly。
