1.
Laboratory heat pressurizer model: dp-j150c
I. Overview of laboratory heating presses:
This type of pressurizer is used for small lithium tablet voltage processes using a single 220v power source suitable for use in higher education and enterprise test lines. The heater is suitable for intra-laboratory battery materials, with small amounts of hand-made rollers of precious metal materials, such as gold and silver, and coloured materials, such as copper aluminium, and adjustable thickness. Decline and density of lithium batteries suitable for clean energy materials.
Ii. Activation of the laboratory heating press:
This equipment is electric-driven and mechanically adjusts the space between the plasters so that the plates are pressured and increase the mass density。
Technical parameters for laboratory heating presses:
Power: 220v, 3kw
2 temperatures of argon: approximately 200°c
The temperature of three or two swirls can be controlled and regulated at will。
4. Thrust size: 150 mm x 200 mm
5. Thrust hardness: hrc62
6. Cylinder: ≤±2 m
7. Effective gap: 0-3 mm adjustable
8. Speed of work: rate of change, line velocity 0-6. 0 m/minariable
9. Glossy:
10. Work width: 200 mm
11, depth of lasagna: 5 mm
13. Large pressure: 10t
2.
Methanol ethanol detector model: dp-105
Methanol ethanol detector detection project: methanol, ethanol
Methanol ethanol detector range: quantification of methanol and ethanol concentrations for distillation, formulation and fermentation。
Methanol ethanol detector technical indicators:
L determination floor:
Ethanol: 0. 02 g/100 ml
Ethanol: 5% vol
L measurement range:
Methanol: 0. 00~0. 20 g/100 ml
Ethanol: 0. 00 ~ 100 vol
L precision: ±2%
L light source: wavelengths 412 nm and 595 nm
3.
Aerobic test device model: dp30165
Main parameters and configuration of aerobic test devices:
Water treatment: 20l/h, exposed tank Φ350 mm x 450 mm, outer size: 500 x 400 x 1500 mm power 220v 300w
Aerobic laboratory device configuration: consisting of 1 organic glass exposure drum, 1 air-exposed leaf wheel and 1 set of serial engines, 1 voltage regulator, 2 sampling vents, 1 electric control box, 1 leaking electrical protection switch, button switch, connection pipe and ball valves, stainless steel stand with mobile wheels, etc。
I'm sorry.
Portable oil detector model: dp-szy
Technical requirements for portable water oil detectors:
(1) host: 173*75*43mm lcd display back light
(2) charge or power, 220v power adaptor direct supply or charge
(3) chargeable lithium battery power (2000mha)
(4) communications interface: rs-232, rs-485
(5) memory: 2,000 measurements
(6) operating temperature: 5 ~ 50 °c
(7) silicon rubber key
(8) software: data can be collected via serial access computers, by software, or by adding remote wireless modules, sending data to the cloud and viewing through a companion browser or app
(9) portable oil detector sensors:
Oil sensor sizes in water: optical sensors φ51*220mm, abs shell, seawater options for titanium alloys: 0-10mg/l, 0-50mg/l, 0-100mg/l timescale customisable accuracy: ±3%, resolution: 0. 01mg/l