Abs plastic plating insulation
The product is a high-quality synthetic resin, acid-resistant, alkalin, fast-dry, well-organized, insulated, insulated protection for plastic plating, well-introduced, smooth paint surfaces, sprayable, silkmarked and decorative, with a heavy metal content that meets international safety standards。
Purpose:Protection of metals or plastic plating products (abs), filamentary, sprayed or immersed。
Methods of use:
Hand oil: one paint oil can be added to approximately 1. 3 insulations of oil for the exclusive use of one-strength oils (1:1. 3 by weight)。
Spraying: a paint oil can be added to approximately 1. 7 insulations of oil dedicated to the use of turbo oil (1:1. 7 by weight)。
Colour: transparent, black, green, blue, red。
Drying time: 3-6 minutes dry fingers, 24 hours dry (25 degrees) hard drying, 1 hour redacted
Can dry 60°/30 minutes. 12 hours of natural drying (abs)。
General dry-painted membrane thickness: 25-30 um. 1st floor
Directly sprayed in plastics or hand-painted and operated to minimize bubble production
It must be dried and then plated。
Surface treatment: the film surface must be clean and the grease and dirt can be removed from the wash water。
Note:A: dry and oil-free works。
B: if you need to retrinkle, you need to retrinkle the water with the use of vanguard。
C: spills must be even before use, and canopy must be covered after use。
Sale price: work fluid¥840. 00/18 litres
Welcome to the call!
Abs plastic plating insulation
The product is a high-quality synthetic resin, acid-resistant, alkalin, fast-dry, well-organized, insulated, insulated protection for plastic plating, well-introduced, smooth paint surfaces, sprayable, silkmarked and decorative, with a heavy metal content that meets international safety standards。
Purpose:Protection of metals or plastic plating products (abs), filamentary, sprayed or immersed。
Methods of use:
Hand oil: one paint oil can be added to approximately 1. 3 insulations of oil for the exclusive use of one-strength oils (1:1. 3 by weight)。
Spraying: a paint oil can be added to approximately 1. 7 insulations of oil dedicated to the use of turbo oil (1:1. 7 by weight)。
Colour: transparent, black, green, blue, red。
Drying time: 3-6 minutes dry fingers, 24 hours dry (25 degrees) hard drying, 1 hour redacted
Can dry 60°/30 minutes. 12 hours of natural drying (abs)。
General dry-painted membrane thickness: 25-30 um. 1st floor
Directly sprayed in plastics or hand-painted and operated to minimize bubble production
It must be dried and then plated。
Surface treatment: the film surface must be clean and the grease and dirt can be removed from the wash water。
Note:A: dry and oil-free works。
B: if you need to retrinkle, you need to retrinkle the water with the use of vanguard。
C: spills must be even before use, and canopy must be covered after use。
Sale price: work fluid¥840. 00/18 litres
Welcome to the call!