Technical parameters for the hahn-gasfedern gas compression spring g 06-15
The lock type of the hahn air spring can be accurately calculated according to your personal requirements and coordinated during the manufacturing process。
Operating the release valve opens the piston valve of the air support pole. When flex locking springs are considered, the nitrogen flow passes through the piston, while in rigid locking springs the oil flow passes through the piston。
Spring function:
The way the spring works and the compressed spring means that the gas pressure in the cylinder pulls the piston into the interior. When the opening is closed, the zipper supports the hand drive. The spring is a closed, free maintenance element. It consists of pressure pipes and pistons with pistons。
A seal was installed on the piston steering device to prevent possible loss of gas. The stretch spring contains compressed gas - nitrogen - providing spring power. In an unpressure state, the piston always shrinks. Pulling out the piston reduces the volume of the cylinder and the gas is compressed. This increases the spring's strength (forward), depending on the diameter of the piston and the volume of the cylinder. The piston has a small opening (nozzle) through which the gas flows so that the piston is moved at the required speed. The cross-section (diameter) of the opening limits the resistance of the spring。
