1-house-based material: polyurethane is used in combination with rubber and the part that is exposed to the belt (main sealing) is polyurethane. Polyurethane is filled with powder, which is more resilient to friction and has a longer useful life and does not hurt belts than the extruded process。
Seal effect: spectrum-resistant dressboards use a straight-board + skirt-side double-sealed integrated structure, straight-board tights on the side end of the guidance tank, contacts at the bottom with the belt to prevent spilling of the material; the edge of the skirt can be rolled up and rotated within the angle, with rubber plate force, automatic tracking of the belt, always in close contact with the belt and with excellent sealing。
The side seal part of the dressboard uses a unilateral arc transition, with belts running sideways without harming belts and skirts and automatically returning to the status quo ante。
4. Each side of the guidance tank is as integrated as required and is as long as the guidance tank to prevent leakage at the seams。
Two sealed spill-proof dressboard installation
Quick fixation of the dressboard through aluminum trap:
Aluminium aluminum (100 mm x 100 mm) is suppressed in form at a time, in mass: full aluminium, beautiful in appearance, not rusty, with a cylinder at its top, locked in a binder and not taken off。
2- the bottom welding of the handler is attached outside the side of the catheter, and the slide goes deep into the bottom, allowing the handler to move appropriately to the left and right along the bottom。
3 hand-rotation presses the handle, pushes it up (down) to the end, where appropriate, to exert sufficient pressure on aluminum to keep the tablet position and presses the handles not loose。