Product name: silicon-coated oil
Rule: 1kg
Methods of use: droppowder, silk prints, migrations, on-demand printing
Solidification condition: 180-220 °c baking 15-20min
Light: bright light
Alignable: no
Product characteristics: high brightness, friction resistance, solid sense, good resilience, endurance
Applicable object: all added silicon rubber products use (construction) to indicate that pre-use materials are second-plus sulphur (150 °c/1-2 hours) and surface is to be cleaned; once ink is removed from the refrigerator, it needs to be replaced by ink temperature restoration. Pre-use ink is fully modulated and industrial kerosene can be used to regulate the viscosity of the ink; it is transmuted or webprinted in a dustless environment. Sulphuration takes 5 to 10 minutes without dust。
Construction conditions
Parameters
Print viscosity (turn viscosity mpa, 25°c)
> 10,000
Forced drying (180-220°c), min
15-20min
Storage conditions
(b) closed refrigeration (storage temperature 0-10), waterproofness, leakproofness, sunproofness, high-temperature protection and distance from sources of fire。
(a) a three-month warranty period
Attention
Apply
1. The product shall be fully and evenly mixed when opened
2. The need to maintain environmentally sound pre-diversion or webprinting and to recommend dust-free disposal between operations in order to avoid the influence of air dust on the printed product surface
(c) the product printed in elemental print should preferably pass a secondary sulphur addition greater than 150 °c/1-2 hours before use, otherwise it may cause partial sulfide of the paint membrane
4. Please note that the ink is refrigerated and that the ink is not fully used is sealed。
Security:
The product shall be used under good ventilation to avoid significant human inhalation during construction and to prohibit consumption。
2. Be careful with the use of the product and be careful with security matters before and during its use. In addition, security regulations established by the relevant state or local government should be followed。
(detailed safety guidance referred to corresponding msds)
Statement: the information provided in this product description is based solely on the knowledge we have gained in laboratory and practice, and we seek to be accurate and believe in a high reference value. But since the use of the product is usually beyond our control, we give assurance only about the quality of the product itself. We reserve the right to modify this note without notice。
