Promap ps edition
Printed material ps version is used to protect the layout, manual or automated systems, both ps and ctp versions。
It is only necessary to evenly cover the surface of the sheet, so that when the wind drys, a protective film is formed that will provide lasting protection against oxidation and scratching. On board, without the need for an open version, it is sufficient that the protective film is naturally dissolved in the mosaic and becomes part of the protected surface composition of the mosaic。
Technical parameters
Type: aerometric ps version
Sensitivity wavelength: 320-450 nm
Sensitivity time: 30 seconds, about 20 pulses (3 kw iodized lanterns 1 m ugra pcw82 bar 3 n't go ink) * exposure time varies according to visual conditions and printing requirements。
Visible time: 20-40 seconds
Visible fluid: water = 1,23+2 degrees)
Resolution: 2 ~ 98%
Thickness: 0. 15/0. 20/0. 25/0. 30/0. 40 mm (customable)
Dimensions: other specifications can be customized to meet client requirements
:: print-resistance rates vary according to printing conditions and image content
Antenna ps specialty:
1. High-quality aluminium versions are processed through processes such as electrolytic grinding and anode oxidation。
2. The solar map ps surface is granularized, reducing the vacuum time and reducing luminous and non-ironous (tan) areas。
3. Suitable for visible, visible and trough processing。
4. Net-point reduction, good ink performance and high print resistance。
5. High-quality raw materials。
6. Equal, multi-layered - strong ink balance, good grid restoration。
Seven, the oxidation layer is dense - high print tolerance。
High tolerance - easy to operate and an adaptable printed environment。
9. Use of the colour-depletion principle - the tan is marked and easy to detect。
Methods of use:
• exposure (sun)
Sun-screened light source: iodine home lamps as a suitable light source: the exposure time varies depending on the source of the light, and the amount of exposure suggested in the table is only one range; when the same version is used, the exposure time is 20 per cent longer than normal exposure time, it is recommended that the lamps be updated。
Film: to ensure the quality of the tan, it is recommended that the film used in the tan be more than 3. 5。
Exposure time: the award stouffer 21-grade grey-scale ruler (scale difference. 015) or the ugra pcw82 controls are placed on the edge of the section, under the film, properly exposed and visible on recommended conditions. The exposure of the aerodynamics at the third level of the grey ladder is the exposure of the aerodynamics, which is the exposure of the pixmap when the ink is not in the ninth stage, or the exposure of the plumes when the 10-15 μm microlines in the control bar are constant, which is the positive exposure。
♪ shadows ♪
Visible fluids: use valor-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po-po。
Visible fluid formulation: enriched liquid volume when the sun map is visible: water volume = 1:6 ∽1:8 when the negative figure is visible, enriched liquid volume: water volume = 1; 2。
Visible stability: 23 °c ± 2 °c. Excessive temperature can lead to a deterioration of the plate network and, at the same time, a decrease in the resistance of the print; too low temperature and insufficient visibility。
Visibility time: not more than one minute。
* releasing
The sun map is based on the use of a radiant pi image elimination agent。
The gynaecography uses the valor vinyl image elimination agent。
In order to remove redundant images from the shampoo panels, a small amount of image elimination agent can be applied to the elimination area for a period of no more than 45 seconds, after which the water is thoroughly washed, the stay is too long or the washing is not completely dirty。
Put the glue on
A thin layer of protection glue shall be applied evenly to the visible and water-washed surfaces. Protection of rubber concentrations and usages should be recommended for use by the protection of rubber producers, and the concentration or excess of use should adversely affect the sheeting。
Baking
Roast tape: high-quality roast tape should be chosen
Baking time: 5 x 10 minutes
Baking temperature: 220∽420°c
The ovens should be strictly recommended for temperature and time operations, which are too short and too low to achieve the effect of the ovens; long and too high temperatures can seriously affect the performance of the plates, and in particular the endpoints of the grills cannot be judged solely by the colour of the plates。
▪ storage, unsealing
Light, heat, and heat change the coating chemically, with a recommended storage condition of 10 ∽30°c and a relative humidity of not more than 65%。
The seal should be unsealed under a yellow light; it was suggested that natural light should be shielded from the layout. The other light sources, except for sunscreen, should be yellow。
The board is carried lightly to prevent collisions, folds and falls, with a level not exceeding 1. 5 metres。
