VIP会员
The checker uses a 7-inch electro-capable touch screen, incorporates various test circuits, uses a separationable electrode pole, and is tested for 3mm electrodes, 4mm electrodes, button electrodes and wearable electrocardiograms. Large-capacity lithium batteries, small in size (261*170*45mm), easy to carry。
Egc-2026 eegab, scope of application
Metric calibration protocols and calibration specifications for various electrocardiograms, electroencephalograms:
- Jjg 543-2008 cardiographer
- Jjg 1041-2008 digital cardiographer
- Jjg 760-2003 cardiostatic monitor
- Jjg 1042-2008 dynamic (mobility) cardiographer
- Jjg 1043-2008 brain mapr
- Jjg 954-2019 digital brain mapner
- Jjg 1163-2019 multi-parametric monitor (cardio-electric)
- Jjf1896-2021 myoelectric and induction response equipment
- Jjf 1149-2006 national measurement test protocol for cardiac defibrillator and cardiac defibrillator (guardian) conforming to the heart, emp control:
- Jjg 749-2007 heart, brain map machine checker
- Jjg 1016-2006 cardioecular monitor checker
Basic egc-2026 eeg tester functions:
It's not that bad Common waveforms such as the output standard square wave, sine wave, triangular wave, analogue electrocardiogram, ecg simulation signal, hr heart rate signal, monitor heart rate signal and pace pulse signal。
It's not that bad The range and frequency of the exported ecg analogue signals, various abnormal heart telecommunications numbers and other random wave-shaped signals are continuously adjustable。
It's not that bad The output of a pathological abnormal heart telecommunications signal allows for the development of any kind of wave shape (to be customised)。
It's not that bad The application of a 7-inch colour-coloured crystal touch screen makes the entire calibration process more visible and accessible。
It's not that bad A direct plug-in and button-buttoned universal-heart connection is used to support 2mm, 3mm, 4mm and button-guided connections to facilitate connectivity to various electrocardiograms, monitors and wearable electrocardiograms。
It's not that bad An automatic manual switch is not required for the conductive switching, skin resistance, polarized voltage, decayers and various additional circuits required for inspection。
It's not that bad The standard screening programme is built into which the type, range, frequency, etc. Of wave shapes are automatically to be switched according to the requirements of the inspection protocol, and the self-defined screening programme is supported。
It's not that bad A time-based automatic check can be used to check the automatic output signal of the item according to the preset, to set the number and time interval of the item to be measured, to apply to the check of the dynamic (mobility) electrocardiogram or other devices, and to improve the efficiency of the check。
Egc-2026 eegab technical indicators:
Yeah Signal range (peak)
Range: 1 μv ~30v。
Maximum permissible error: 8 μv ~ 50 μv = 5%
50 m v ~ 80 m v ~ 1%; 80 m v ~ 30 v ~ 0. 5%
Yeah Fang bo
Periodic range: 1 ms-50s, maximum permissible error: ±0. 05%
Yeah Sinewave
Frequency range: 10 mhz ~ 1000 hz, maximum permissible error: ± 0. 05%
Numeracy: < 1%
Frequency range: 10 mhz ~ 1000 hz, maximum permissible error: ± 0. 05%
Numeracy: < 1%
Yeah Delta wave
Period: 1 ms-50s, maximum permissible error: ± 0. 1%
Yeah Numeric signal
Frequency 1hz, maximum permissible error: ± 0. 1%
Yeah Standard heart rate signal 1 (triangular pulse wave, plus or minus 2) heart rate range: 10-500 times/minute, maximum permissible error: ± 0. 1%
Yeah Standard heart rate signal 2 (simulate ecg, hr simulation signal, simulated muscular heart rate)
Heart rate: 20-300 times/minute, maximum permissible error: ± 0. 1%
Yeah The pace signal
Angular pulse range: 2mv, 20mv and 200mv, maximum permissible error: > 0. 5%。
Angular pulse frequency error: ±0. 2%。
Yeah Polarized voltage
Range: ± 300 mv, maximum permissible error: ± 1%。
Yeah Co-mode voltage
Range: (9-11) v (effective value), maximum permissible error range: ± 5% frequency range: (50-120) hz, input resistance: > 300 m。
The detector uses a 7-inch touch screen liquid crystal, which is user-friendly。
With a time-based automatic check, you can check the item's automatic output signal according to the preset, setting the number of items and the time interval。
Range: (9-11) v (effective value), maximum permissible error range: ± 5% frequency range: (50-120) hz, input resistance: > 300 m。
Yeah Emp balance decayer
Decomposition ratio: 1/1000, maximum allowable error: ±0. 3%
Yeah Simulate skin resistance
51k electrical resistance is linked to 47nf electric capacitor
Maximum permissible error: resist ± 2%, capacitor ± 10%
Yeah Enter to block string resistance
620 k resists are connected to 4. 7 nf capacitor
Retardation 2%, capacitation 10%
Yeah Enter current-string resistance
10k electrical resistance, maximum allowable error: > 2%。
The detector uses a 7-inch touch screen liquid crystal, which is user-friendly。
Check interface
The system foresees a variety of screening options (or self-set), which the user can complete by clicking on the "next " , which automatically sets parameters such as the type of signal, range, frequency, guide, test circuit according to the preset program。
Provides manual mode of operation whereby the user can choose the type of signal, setting parameters such as signal range, frequency, conductor selection, and test circuits。
With a time-based automatic check, you can check the item's automatic output signal according to the preset, setting the number of items and the time interval。
Symmetric inhibition comparison checker
The principles of the co-mode inhibition control device are shown in the figure below:
G for a sine signal source, frequency (50-120) hz, active value 20v, v for comodular voltage table
C1 is 100pf capacitor
Ct is (0-200) pf capacitor