Ground drawings of 5 centimetres, 10 centimetres yellow line, white line price, standard division of warehouse area, surface route, area line, type of location line, main road line of the factory area, line of division of the area of work, line of surface route in suzhou, line of cargo line in warehouse factory area, price of factory area, line of ground road drawings in suzhou factory area
1. Workshop wiring and marking requirements: yellow paint line (60mm: cargo locator line; 80mm: equipment area line; 120mm: main route or fire escape line)
2. Red line: a requirement for the marking of a bad product area
3. Black and yellow slash lines 50 mm wide: hazard warning area underlined
4. Red and white warning line 50 mm wide: the marking of hazardous goods such as fire protection equipment, oils, chemicals, etc.
The main roadways for vehicles and fire protection in the workshop are not less than 3. 5 metres; the pedestrian route is not less than 1 metre wide and conditions are recommended to be 1. 2-1. 5 metres wide; the forklift passage is not less than 3. 5 metres; the safe passage is to be marked with a yellow-colored line of width of 10 centimetres or 15 centimetres, and the surface of the route is to be marked with a green/yellow-colour plaque at all times to ensure unhindered access。
6. Not less than 4 metres above the sidewalk, and not less than 2. 5 metres above the sidewalk, which should be robust and reliable
The end-of-plant inspection requires that the ground in the plant be kept clean, dustless and non-commodity, that water, oil and paint not be allowed for any reason, and that scattered parts and products not be allowed. Area lines on the ground are clear and the items are not placed under pressure。
Contact: hui jui li telephone: 18015593357 tel: 0512-66062792 q: 277171599
