VIP会员
The us bc esu-2400 esu is a high-precision, real rms measurement system for calibration and routine performance verification of electrosurgery generators. It provides a higher degree of accuracy in design than was previously possible using the traditional electrosurgery module analyser. Esu-2400 provides advanced low-power resistance internal load teams ranging from 0 to 6,400 om in 1 om. It is based on microprocessors and uses a unique combination of hardware and software to provide accurate and reliable test results, even from "hush" esu waves such as "spray". The patents used in esu-2400 have yet to be determined that the dfa technology allows the system to digitize the complex rf waveforms generated by electrosurgery generators
Esu-2400 power knife analyser
Unlike many traditional esu analysers, the u. S. Bc esu-2400 has an internal hv set-up relay to control the measurement path, allowing users to switch between power measurement, leakage measurement, cqm / recqm / arm testing, and even to run what may include any or all of these tests - even mobile wires。
U. S. Bc esu-2400 esu monitors current flow through internal test loads of rf currents and produces proportional voltage by microprocessor digitization and analysis. Using the current sensor combination of esu-2400 standards and low ranges, users can fully control the ability to obtain high accuracy and resolution readings from all types of electrosurgery generators。
Main functions of the united states bc esu-2400 eru analyser:
• valid value readings using dfa techniques
• industry standard current detection techniques
• mv, mv peak, ma, peak factor and power (watt) range
• colour qvga display with touch screen
• 1 per cent of reading measurements
• digital calibration - shift
• optional display options
• graphical representation on screens measuring rf signals
• standards (1,000 mv) and low range (100 mv) and automatic scaling capacity
• model for low-cycle pulsed output rf waveform measurements provided through certain electrosurgery manufacturers
