The sdvc311 digital fm vibrating delivery controller is a compact, universal fm output controller that provides unique performance through the use of state-of-the-art electronic technology and elaborate design. Its features include:
An output frequency range of 5. 0 hz to 40. 0 hz with an accuracy of 0. 1 hz。
The brake function, which quickly stops the vibrating disk by moving the current 180° during the slow shutdown。
An pv port supports an pv sensor, npn or pnp switch sensor。
Npn, pnp or automatic adaptation type is supported by a full stop port。
The control output port supports npn, pnp or pullout mode。
Complete protective features include: short circuit protection for main output, transient protection, overheating protection, power failure/overpressure protection, short circuit protection for controlled output, 24v short circuit protection for output, and speed 5v short circuit protection。
This product has significant performance improvements compared to sdvc31-m controllers. These include, inter alia:
The output frequency of the zirconium was raised from 40. 0 hz ~400. 0 hz to 5. 0 hz ~400. 0 hz。
An increase in the maximum of 20. 0 seconds to 99. 9 seconds in light power, full stop port opening/off。
Adds a slow shut-down feature with 0. 0 ~10. 0 seconds to slow-stop the vibration。
Adding brakes allows the setting of 0 to 100 brake weeks for the rapid cessation of vibration。
Add pnp sensor support to the pv port。
Full stop ports are upgraded to software settings by npn, pnp and provide automatic mode。
The control output port type is upgraded from npn output to set up npn, pnp, push three types。
Adds a new control output port opening/delay, setting 0. 0~99. 9 seconds。
Adds a control output mode to set the delay mode and keep it。
A new measurement function is available to monitor temperature displays, main-line voltage, output currents, analogue speed a-point voltage, b-point signal voltage, c-band signal voltage, d-port output voltage, 24v output voltage。