I. Overview of equipment:
:: the machine is suitable for engineering plastics, modified plastics, corroded and squeezed out processing experiments, and has the functions of plasticizing the same, colouring and refilling。
:: professionally manufactured screws and drums, high processing accuracy, quality assurance
:: brand-driven, screw speed control stable
* the size of the particles is coarse enough to be plasticized and refined in the screws。
* this product uses a household voltage of 220v, which is adjustable at the rate of extraction and can be set at random between constant temperatures - 300 degrees。
*crossed out of the centre high of 300mm, with maximum output of about 0. 8 kg-1kg per hour using abs materials。
♪ the machine's a single screw
Ii. Scope of application of small single-heavy compressors in laboratories:
:: melting and plasticizing materials
:: optimization of extruded process parameters
:: organization of small experimental lines, such as film, film, pipe, grain, etc
Iii. Material structure
This method is used to input plastic granule raw materials into a plume, melted through a screw-heated area, then rotated out, with a perforation model to squeeze out the melted plastics, and then passed through other cooling, pull, paper collections, etc. To make the required product sizes。
Technical parameters:
1, screwdriver 35 mm diameter, yield: 0. 1-3kg/h
2, width height, 0. 73* 0. 2* 0. 4 weight: 32kg
3. Production line speed: 1 - 40 m/min (actual production rate according to customer line)
4. High extruder centre: 300 mm
5. Production direction: right to left out
6. Electrical power; 0. 4 kw with high temperature reduction tanks, with a total installed power of 1,200 w。
7. Power voltage: general 220v single-stage household voltage, which may also be applied to customers;
8. Gravity ratio: 13:1
9 - heated temperature up to 300 degrees, heated component: stainless steel heated (other company also provides high temperature, maximum temperature up to 500 degrees, linked to website)
10, substrate cooling devices (preventing too high temperature of the substrate and premature melting of materials, causing congestion)
11, barrel screw 38cr nitrogenized
12, cooling tank length: 500mm, pump power 3w
13, particle cutter size: 500*500*400, 30kg, variable frequency modulation, electric power 370w, 220v household electricity。
