Rationale
Transfluid liquid pyroscope is a hydraulic transfer device. Both wheels are like centrifuge pumps and water turbines. The kinetic energy is passed on to the fluid in the pyrotechnic when the pump wheel is entered (e. G., electric or diesel). The fluid is operated by centrifugal forces along the pumper blades into the turbine blades。
Turbo absorbs kinetic energy and produces a twist equal to the input twist to rotate the output axis. There was no mechanical contact and no wear. The rate of transmission efficiency is affected only by the shift rate between pumps and turbines。
The deviation rate is necessary for the work of the hydraulic pyrotechnics, i. E. There is no power transfer without the rate! The loss of power can be calculated from the deviation rate. The conversion factor formula is as follows:
Rate of deviation = (input speed-out speed)/input speed) x 100%
Under general conditions (standard load), the deviation rate varies between 1. 5% (high power) and 6% (small power)。
Transfluid fluids comply with the laws of all centrifuges:
1. A positive ratio of the two-tempo of the transmission and input speeds
(ii) a three-temporal ratio of power transfer and input speed
3. The five-temporal ratio of the transmission power to the circular diameter。
The k series of hydraulic pyrotechnics, which need to be refuelled when working, can be provided with the required water。
The series of products have been certified for blast protection instructions of 94/9/ec (atex)。
Apply
Skinner
Dryer
Mixer
Ripper
Winners
Belt transporter
Vacuum pump
Crusher
Mill
Centrifugal pump
Pulp mixer
Ship propulsion
Wind generators
Wind and wind
Drum peeler
Mill
Contact information:
Cell phone/webmail: 1302-1972807
Q: 266 847 6640
Tel. 010-64471720-226
Fax: 010-6471720-668
Mailbox: tk3@handelsen. Cn