Tn 5478 soft point testerSoftener for painting rods
Instrument profile
For crayons, paint rods and softeners。
Functional properties
Introduction of full computer control, electrophotometry, high accuracy。
2. The instrument is also of a temperature and hot-line nature, evenly mixing bath fluids。
3. Two samples can be tested at the same time and the results are reliable; automatic testing of the specimens is a softening point, a high degree of automation and a fast test, and is an intelligent instrument for testing asphalt softening points。
4. Results viewed: lcd screen shows that by connecting the interface, the data can be printed by printer or computer on-line (as provided by the user)。
Technical parameters
Temperature range: 0 ~ 180 °c (softified sample at 30 °c ~ 80 °c, heated media with distilled water; soft sample at 80 °c ~ 157 °c, heated media with glycerine)
Temperature resolution: 0. 1°c
Temperature accuracy: ± 0. 5 °c
Standard steel ball diameter: 9. 53 mm, weighing 3. 5 g±0. 05 g
5. Bridging speed: 9 consecutive steps
6. Heating rate: automatic adjustment to 5. 0 ± 0. 5 °c/min after three minutes
Heating power: 600 w
8. Cup capacity: 1000 ml, 86 mm, 120 mm high
9. Power: ac 220v, 50hz, 800w
[based on criteria]
Qb/t 1336-2020, qb/t 2586, jtj052t0606, jttg e20 t0605, etc
- please approve the purchase of the products of our division, all of which are certified with a copy of the product, warranty card, certificate of certification, inspection report, etc., and have its own code
- selfless teaching: installation of training, operational steps, attention, maintenance, test details, etc。
- this is not necessarily the current, all of which is based on what is actually happening in our department。
- as a result of the upgrading and upgrading of the performance and functions of the products, the appearance of the products will change。
General saftoNny / saftomy, commercial and quality inspection units rely on equipment suppliers
Our division products have been certified by the agency, the metrology and testing centre and the south china metrology and testing centre have been certified and have received high-reliability praise from a wide range of clients, both at home and abroad. It was used by a number of large testing laboratories and brand vendors
Sgs, bv, intertek, str, tuv sud, tuv rheinland, cti, etc
Honours and certificates:
Standard export packaging:
After-sale service commitments and training programmes
1. Installation, debugging
Our post-sale service engineers were deployed to install all contracted products and systems and debug the equipment into normal operation。
2. Free training
2. 1 training time: in conjunction with the stages of installation, commissioning, commissioning and commissioning of applications, five days of training, depending on the circumstances
2. 2 training content: equipment doctrine, installation, commissioning, operational use, equipment repair, troubleshooting, routine maintenance, etc.
2. 3 training methods: human face-to-face training combined with equipment and training materials
2. 4 location of training: centralized training using equipment on site or organized by the buyer
2. 5 teaching staff: post-sale service engineers
2. 6 level of training: the trainees are skilled in the content of the training
2. 7 number of personnel trained: 1-3 operators trained on site or selected by the user。
3. Z guarantee
3. 1 equipment z warranty period: 1 year
3. 2 during the product z warranty period, any failure of the system (any product quality problems due to defects in product design, process, materials, packages) is performed by the supplier at no cost for failure maintenance, replacement of spare parts and maintenance
Maintenance services and maintenance are provided for life after the expiry of the 3. 3z guarantee。
4. Maintenance response and fees
4. 1 maintenance failure response time: our company responded within two hours of notification, either during z or after z. If a problem is solved at the door, the engineer arrives at the scene within 24 hours
4. 2 fees: z provided for free maintenance and replacement of spare parts for the duration of the warranty, due to the quality of the equipment itself, except for the cost of replacement consumables and spare parts。
5. Service plan
5. 1 the sale of equipment is managed through a sales customer management system, which regularly alerts the after-sale service to follow-up services, such as maintenance of equipment, installation of consumables, and regular customer returns and usage surveys
5. 2 “preventive maintenance type” post-sales services: for life, no less than one free-of-charge home visit per year for operational inspection, adjustment of operational parameters, cleaning of equipment, normal operation of equipment, extended useful life.
5. 3 during the one-year warranty period, if the upgrade of the company's instruments is required to meet the new standards as a result of the upgrading of the relevant standards, we will actively cooperate in the use of the unit modifications, the costs of which will be borne by our division。
6. Free and long-term technical advisory services
6. 1 the after-sale service department of the company has a technical support engineer who advises clients on technical questions, provides timely responses and maintains long-term, good technical exchanges and collaborative relationships with users。
Tomy town community international testing technology ltd
ToNny technology limited