Fog plowing systems are a fast and effective dust suppression product that is primarily directed at larger outdoor areas。
The device presses water to 80-100 kg of high pressure, driven by the pump power source, and sprays the fog over an area of 8-15 metres in a water-based fog. The product has characteristics such as intelligence, multi-manipulation and high dust coverage。
They are generally located in high-temperature dust sites, such as road streets, construction sites, outdoor operations, mines, coal fields, power plants, construction sites, squares, subdistricts and mud industries。
Characteristics of the performance of the fog pillar too high to spray the dust:
1. A mist of small particles is generated by the fog pyrotechnic pyrotechnics, which can contain large areas of spray dust。
2. At the same time, air moisture can be increased to create a comfortable working environment。
3. In the summer, high temperatures can keep temperatures at 32-35°, with the effect of cooling。
4. The fog-throwing equipment is small in area, the equipment is low in input, the intelligence level is high and the operational maintenance costs are low。
1) smartisation uses touch screen manipulation, which is easy to visualize. A variety of control models, each of which can also be time-regulated, can be more rational, depending on the actual situation on the ground. Start and end at any time can be set。
2) multi-control mode manual control: fog poles that are manually activated and closed. Time control: is able to set the opening and closing times and activate them according to the time cycle. Ground sense control: ground sense control, when vehicle passing is detected at the detection site, fog stakes are opened, when time delay ends, and fog stakes are automatically closed. Dust detection control: implementation data are monitored through the dust monitoring system and the system is activated when dust exceeds standard。
3) the effect of dust suppression is better if the water is mistified by pressure from a high pressure pump, if the particles are mistified, if the amount of water can be adjusted by pressure, and if the dust rises out of the room can have a good anti-dust effect。
4) improved energy efficiency and compatibility power sources are more energy-efficient through the use of fm power. The spray system is compatible with temperature, acoustic, infrared and other equipment to achieve higher levels of automation。
5) the noise is small, using high pressure pumps, which are concentrated in the room, and the mist droplets are delivered mainly on the pressure of the water itself, reducing the noise of the high power wind machine。
