Product name: solar four warning lamps
Model:Xh-sgjsd-4t
Specifications:410 mm x 150 mm x 230 mm
Technical parameters:
Solar panels:3wp
Free of batteries:4ah
Light source:Led luminous diode
Single tube brightness: red light:8000 mcd blue light: 7,600 mcd
Led service life:100,000 h
Light colour: red, blue
Light area:Twenty-two and two
Flash frequency:48 times ±2/min
Flash mode: flash/ swinging alternately
Control mode: microcomputerIc chip
Work voltage:6v
Visual distance:1000 m
Working mode: 24/724h work/light control
Working hours during rainy days:10-15 days
Installation of pole inner diameter: <80 mm dome/ (mobile tripod construction)
Design useful life:3-5 years
Range of solar four-seat warning lights:
1. Road maintenance operations are placed in front of the driver to warn him to drive carefully。
2. Installation of dangerous areas on the road with traffic safety risks alerting drivers or pedestrians to act effectively as a warning against traffic accidents and accidents. Such as road junctions, bends, bridges, roadside village junctions, school entrances, residential subdivisions, plant main entrance lights, etc。
Introduction to solar four-gauge warning light products:
1. Solar flashlight shell by polycarbonatePe-type combinations are not perishable and do not show rust in their use。
2. The flashlights use a sealed-structured combination group of lamps, which are sealed at all points connected to the components of the whole lamp, with high performance protection of a level greater thanIp53, effective rainproof, dustproof。
3. Each set of lightsThe composition of leds for 20 single lamps (more or less light) of 8,000 mcd, together with the reflection panels of vacuum plating film; high-transparent, high-impact resistant, aging polycarbonate lamps, allows this lamp to reach a distance of more than 2,000 m at night and allows for light-controlled or long-lighted second-stage regulation (optional) to be used at different stages and times。
4. A flashlight with a solar panel, single crystal/ multi-crystal panels, using a smoothing of glass under steel glass pressure, better light, higher energy absorption, a supply of power for 150 hours of sustainable work free of solar-solar maintenance, and a charge-over-discharge protection, balance of current-circuit stability, environmentally friendly three-paint coating of circuit boards and better protective performance。