The fs580 is a more primitive method of flow detection, which is achieved through the flow of water. It has up to 1. 7 mpa, which can be used in a pipe of 1-8 inch diameter, and leaves can be selected from the diameter of the pipe. The material in the shell is found in aluminium and is protected by ip65。
Setrasit fs5801-r1-05-m015 is a plasma flow switch that triggers a micro-movement switch by impacting the water stream on the leaves. Output of relay signals (spdt) to detect water flow in the pipe。
Set itself does not have a flow switch, a product that has been developed specifically for hvac and cooler applications, with unique bovine structures that stabilize the switch, set point accuracy of 15%, repeat 5%, break pressure of up to 2. 5 bar, medium temperature of 110°c and working temperature of 0-60°c。
Fs580 has two main screws: r1 and 1 “npt”, with a lead line of 0. 5 m and 1 m length. Flow setting points can be set according to actual needs. Fs5801-r1-05-m015 is a plasma flow switch that triggers a micro-movement switch by impacting on aqueous leaves. Output of relay signals (spdt) to detect water flow in the pipe。
The fs5801-r1-05-m018 current switch is set at 18 cubic metres/hour, the screw is the r1 interface, the pipe can be between 1 inch and 8 inches, the leaves can be long or short, and can be selected first
The fs-580 water flow switch is a special presence, as the brand is both stress and differential. The current switch was developed to meet the needs of the hvac. Because hvac presses the switch with a number of small differentials, such as 266,261c 264,265,267,268, or srim1,srim2, srimv, svp, srpd, srcm srpm, etc。