For the new open furniture plant and the customers who intend to upgrade the equipment, how to choose the non-pore-painted furniture production equipment is now explained. If you only make cabinets, you can choose the four processors or the two-axis liners. The 4-step starter is the four main axle, one starter, one slot, two holes. One day, about 50 plates。
There is also a double-axis cut-out rig opener, a main axle opener, a main arc pull tank, a drill bag dedicated to piercing, which is particularly efficient, with nine drills, which can hit any of the holes. This machine makes cabinets that can do 70 or so a day. Both machines make cabinets, depending on the size of your output。
Installation of all-house custom furniture plant equipment for the production of non-pore-coated furniture equipment
There is no choice between a cavity-free furniture production facility and the processing centre if the door is made, because there is a large number of knives required for the door, which can be engraved on the door, depending on the size of the door, and the number of knives required, which may require four knives, if the door is more complex or more of a plated door. The processing centre, on the other hand, is the main axle with a knife bank, which can contain 12-16 knives and meet any complex cabinet-door configuration. All cabinets are made, either at the processing centre or at the drilling bag processing centre, where the knife store can place 12-16 knives, which are usually only used for four knives, and where the rest of the carving doors are adequate. The drilling rig processing centre is based on the processing centre by adding a drill pack, which is more efficient and faster when the cabinet is pierced. This machine is the fastest machine to make cabinet doors. The cabinet requires an opener, a side-hole, and a closed side. A small amphibious latcher for a cabinet door requires a processing centre and a vacuum rembrandt. The sand-light machine may be omitted from the forward period. Get a chain drill。