Switch to rollerWhen used, there are different models, depending on the type used, and in order to make the process of reproduction more able to match the speed of production, let's go to the following for a more detailed look at the meaning of the roller specifications。
One, in terms of power, can be divided into 60w, 40w, 76w, and the speed and load of different specifications are different when used, and the power is not as good as it is when purchased, for example, it is not very high for transport speed and load requirements, but choosing to use more power would be wasteful and more expensive than it is for power。
2. Rollers can also perform different treatments on the surface, such as packaging of different materials。
In terms of voltage, there are 220 vs and 380 vs, and in terms of 220 vs, there are three separate ones, which we need to take into account when choosing to switch to rollers。
4. Other equipment can be adjusted at the speed at which it operates, while some are fixed at the speed at which it cannot be reconciled, and those that can be reconciled can be more flexible when used。
And because the demand for the roller is different, it also leads to options of various sizes, such as the use of smaller sites for recommending smaller specifications so that they can be extended in subsequent maintenance。
What we're talking about is changing to some of the more common specifications of the rollers, and many of us are wondering what the point is, and we might actually be able to help us get the right equipment to use it。
From: http://www. Jiankaigundong. Com
