The exo-skin package consists of a waterproof membrane coat, which is wrapped outside the sensor insulation and is used to protect the sensor and the heating device. Hydraulic coats are made of tfluoride filled with special hybrid fibres, which are air-transmitting but not leaking, in other words, they can pass through water vapours, but liquid water cannot pass and the protection of sensors is not affected by rain。
Interrupting water penetration, ensuring, as far as possible, that the surface of the rod and the surface of the sensor are dry, extending the time of use of the sensor, and achieving seasonal uninterrupted measurements in some plants。
Reduce the damage of microorganisms to plants and sensors themselves and prevent the erosion of electronic components。
Waterproof membranes surround the perimeter of sensors and insulation packages, prevent rainwater from entering and absorb the water vapour around the device, thereby reducing the concentration of water within the sensor。
Exo-skintm skin-packaged tubers device
Sensor type minimal diameter (mm) maximum diameter (mm) height (mm) enter voltage (v) typical flow (w) temperature thermal plot
Sgex-9 8 10 70 4 0. 13 2
Sgex-10 9. 5 13 70 4. 5 0. 15 2
Sgex-13 12 16 80 4. 5 0. 17 2
Sgex-16 15 19 90 4. 5 0. 2 2
Sgex-19 18 23 100 4. 5 0. 34 2
Sgex-25 25 29 120 4. 5 0. 48 2
The exo-skintm coated tubing (liquid flow) sensor is a product of further innovation based on classic energy balance tubing measurement techniques. Since 1990, dynagage sensors have been widely used in multiple field studies. With the application of the tubing monitoring system in commercial vineyards and the introduction of the sapip system, more users need to install simpler and more economical sensors. To this end, dynamax has designed the new single-formulated exo-skintm sensor for dynagage for more users. The sensor is more durable, simple and reliable。
Innovation advantages
The exo-skin tubing sensor consists of a more streamlined insulation material, which can be used to isolate electronic conductors, and the outer layer consists of heaters and sensor electronic devices in a layered package。
More bent sensors, especially for the installation of coarse and uneven rods。
Separated electronic sealed materials reduce production costs。
Exo-skin uses elastic nylons (velstretch) entangled around plants to protect heating on plant poles。
Multiple installation and maintenance problems due to plant growth have been reduced。
Protection of sensors does not affect the growth of plant rods。
Installation and maintenance are simpler。
The nylon stretching material is well ventilated, using multi-pore permeable nylons and synthetic ballistic fibres。
It is possible to collect moisture and direct water from rods and sensors。
Extension line selection (9 needle sealed round lock connector)
Exqc-25 25 ft. (7. 6 m) extended line
Exqc-50 50ft with quick access. (15 m) extension line
Exqc-75 75 ft. (22. 8 m) extended line
Exqc-100 100 ft. (30. 5 m) extended line
