Dismantling method
Look for two towels, one hand and the right hand to the left hand to wrinkle the wheel with the blade (which, however, is in the direction of a timewise needle) and be careful to put a towel on to prevent the blade and the edge of the knife, which, if it takes too long, may not be able to break, so that you can put the blade to the ground (preferably put a towel on the floor and throw the floor on the concrete floor to make sure that if you need something to put on the plastic part under the crossblade... Don't let the knife fall on the floor) and hit the part of the metal part of the link with a few pliers in order to shake the screws
Operational methods On startup, there are three dents on the condensed machine on the glass, and the point pairs of the chutes are right-to-right and down the cup (the two actions are not just turned off). When you stop, just screw the bottom of the glassAnd don't put the cup firstI don't know. And noIt's even more wrong to plug a glass with a power plug and switch! If you want to live long, you have to make sure that the wheels in the blade seat and the electrics are intact and that the proper operation is not easily worn out
