Performance characteristics
◆: the product is certified by the agency and has excellent performance and can work in various flammable and explosive sites
◆: select led light source, with high light efficiency, high visibility, low energy consumption and long service life, free of maintenance costs
(a) economy: high-energy memoryless batteries, large capacity, long life, chargeable, recycled, low self-release, economy
(a) waterproofing against falling: the use of special-quality alloy casings to ensure that products withstand collisions and shocks
(b) smart control: strong light, working light working patterns, light-sharp, light-wielding at will, smart chip control to prevent overloading, overlaying and short circuits to effectively protect batteries and extend their useful life
(a) electricity detection: humanized four-part electrical display and low voltage warning functionality designed to allow viewing of battery power; and yellow warning at the bottom of the lamps, which can alert staff, signal or location, etc.
Easy: light head structure design, light angle 90° ~ 180°, light, light weight, handheld, seating, hanging, magnetic adsorption, etc., easy to use。
Technical parameters
Rating voltage: dc7. 4v
Scaled capacity: h
With light source: led
Rating power: 12w
Lighting form: spotlight/panning/sign light
10h of light for continuous working hours 20h of light work 80h of signal light
Warning light colour: yellow
Marker: ex de ib mb iic t6 gb
Protection level: ip66
Outer size: 172 x 156 x 210 mm
Product weight: 1400g
Description of use
1. The buttons are controlled by two strong light worklights off and two high light light signal control buttons, with a strong light worklight button, which opens the working light, opens the strong light and closes it again by pressurizing the pressure; and a flash light button, which presses the open light, opens the spotlight mode and opens the bottom light flash mode for five seconds。
2. At previous use, charge time is 10 hours and can be charged at normal charge time to ensure that batteries are regularly fully charged
3. In use, if the power is about to run out, the power indicator light will glitter and will automatically protect the battery and cut the power for about 10 minutes, at which point it should be discontinued and charged in a timely manner
A charge protection device inside the charger that removes the charger's dust cover from the header, provided that the output plug of the charger is immediately inserted into the charger plug, the red light indicates that the charger is charging and the red conversion green indicates that the charger is charged
5. Rotation of irradiable angles at 120 degrees to meet lighting needs
6. After one full-power operation, it can be used within one year, and if long-term placement is not required, recharges will be good for about six hours every six months
Warning:
1. When replacing light sources, charging or removing lamps, do so at the site
2. Charge on time after each usage
Attention
1. Fill it with electricity for use and charge it in a timely manner for each use
2. The lamps may be recharged using chargers supplied by the company。
3. Do not throw batteries away from heat or fire sources。
4. Not to be placed in a strong acid or strong alkali solution。
5. Lights shall be disabled when charged。
When charging, note that the type of charger and the specification of the charger should not be confused。
7. When carried or transported, ensure that buttons are protected from external pressure so that electricity is not used
8. Do not randomly direct the light to the eye, which may cause injury