The stainless steel angular valve, 2 inches, 2 inches, 3 inches, 4 inches, product size
In view of the variety of product types and parameters, please call or tweet
Description of aerodynamic valve products:
Angular valves can be divided into single and dual functions by cylinder。
The single-acting aerodynamic head is usually a hole, the method of work; depending on the re-entry of the spring to open and close
It's open and closed。
The two-acting aerodynamics usually consist of two holes, the working method of which is to give control over their opening and to shut down the gas control valve。
Close and reliable. It has two sealed surfaces, and the ball valves have extensive use of plastics, which are good for sealing and complete sealing. It is also widely used in vacuum systems。
The sphere of the ball valve is floating and, under medium pressure, the ball is capable of causing a certain shift and pressing on the sealed surface at the end of the exit to ensure that the exit is sealed。
(c) the core type of the inner component of the electro-regulating valve: the core of the superconductor monomer (stoll) plume。
The aerodynamic angular valves:
In non-working situations, valves are closed (open) due to spring force
The valve is opened (off) when the implementer piston is activated by compressed gas。
The dual-action form is the compression gas control valve switch。
Two-role cylinders: switch gas from both sides of the piston to output power in one or both directions. The triple valves are of t and l type. T-types enable the three active pipelines to connect each other and cut off the third channel, diverting and combining。
Characteristics of aerodynamic angular valves:
Aerodynamic acoustic valves are widely used for short-time and frequent start-ups and are responsive
The precise characteristics of the movement, combined with the use of an electromagnetic valve, can be used to control the flow of gases and liquids accurately。
Supply 2 inches 2 inches 3 inches 4 inches。
When an electromagnetic valve is installed, the medium shall flow in the direction indicated by the valve arrow, the valve shall be fitted to a horizontal pipe, the circle shall be in a straight position and the valve shall not be fitted to a spatter or leak. Waterproof types, if required, may be specified separately. For pump-import pipelines, bottom valves, which are generally only installed on vertical pipelines for pump-import and move from bottom to bottom。