Modifier rectangular measurement sensor 0-5000 nm optional engine rectangular speed detection yi
Fyth is a rectangular speed measurement sensor based on the principle of non-exposure, and there is no friction between the rotation axis of the dynamic twister and the signal acquisition device, which makes fyth the transtract sensor more durable than the dynamic twister of the traditional slidering structure. Fyth has an optional range of 0-2 calcium, 0-5 calcium, 0-10 calcium, 0-20 calcium, 0-30 calcium, 0-50 calcium, 0-100 calcium, 0-200 calcium, 0-300 calcium, 0-500 calcium, 0-1,000 calcium, 0-1500 calcium, 0-2000 calcium, 0-3000 calcium and 0-5,000 calcium, and at the same time supports speed conversion measurements up to 12,000 rpm, with highly integrated electronic circuits that can directly export ±5v / ±10v/4-20ma standard analogue signals for plc capture or other digital mining systems. Fyth, which is the electron-rotation rectangular meter, can be connected to the electric axle or the load axle by means of a joint instrument to measure the static outer shell of the sensor during the process, and the axis of the transcrometer is rotated with the electric axle. This section of the rectangular measurement sensor is frequently used for such rotational rectangular detection as electro-motive test stations, industrially installed twister tests, server-rotation speed measurements, mixer rectangular control, movement axis rectangular measurements, power machine rectangulation speed measurements, water pump twister tests, gearbox twister transfer efficiency tests, etc。
Fyth exterior size map of the rtm sensor:
Fyth parameter table for the rtm sensor:
Scale: 0-5000 calf (optional)
Use: motion-to-reverse rate measurement
Rotation measurement range: 0-12000 rpm
Electricity: 12v/24v dc
Rating output: 5-5v, 0-5-10v, 4-12-20ma
Non-linear: ±0. 2% full range
Delay: ±0. 2% full range
Non-duplicate: ±0. 2% full cheng
Worm (5min): ± 0. 1% full cheng
Safe overload: 1. 5 times cheng
Maximum overload: 2 times range
Temperature compensation range: -0... + 40°c
Use temperature range: -10... +60°c
±0. 02% full range/°c
Sensitivity temperature drift: ±0. 02% full range/°c
Axis: stainless steel
Shell material: alloy
Connection: axis
Protection level: ip40
Guide: 6*3000mm (composed of interfaces)
The etm fyth uses the built-in transformer for direct output of 5-5v, 0-10v, 4-20ma standard analogue signals, the size of which is proportional to the size of the rotation rectangular values and the rate of rotation, so that the rotation rate can be measured by measuring the simulation. In the case of type fyth-100-10000-b, this twister requires 24v dc power supply, a rectangular route: 0-100 octometers correspond to 0-10v output, 0-100 nm reverse-hourwise to 0-(-10v) output; and a turnway: 0-10000 rpm corresponds to 0-10v output. Turnback values/turn speed values and output signal sizes are linear in the range of error, with the current 10-cow-mei-clockwise twister load when the turn-channel output is 1v, with the current 50-cow-mi reverse-hourwise twister load when the turn-channel output is 5v, and the current turn-off rate is 5000 rpm, and so on。
Quantum selection for dynamic twist sensor fyth
Definition of quantum range: within the parameters indicated, the sensor is designed to measure the upper limit of the rectangular value。
Measurement range: the measure range for a twist sensor with a mass range of 100 nm is 0-100 cc, and the range for a twisterometer with a mass range of 20 cc is 0-20 nm。
Accuracy level: the relative accuracy is based on a numerical range, and for sensors of the same type, the relative accuracy is generally the same, e. G. A sensor of 0. 2% accuracy measured at a scale of 0. 2% for both 10nm and 50nm。
Operational life: the rectangular of 100nm is also measured with a twister range of 100nm and 200nm of the same type. The twister sensor of 100nm can be understood as full load, the force rectangular sensor of 200nm is non-full load, and the twister sensor of 200nm has a longer service life than 100nm。
A maximum of 10-30 per cent redundancy in the general twirl measurement process would prevent damage to sensors from the impact of the application on the one hand, and extend the useful life on the other. For example, the application of a 20-50 calcium rectangular measurement range for generators allows for the selection of a dynamic twister test with a range of 100 calcium, and the application of a pump rectangular range of 100 calcium-150 calcium with a range of 200 calcium is available。
Forsentek passage control ltd. Is a high-technology, high-technology company based in hong kong that specializes in gravitational sensors, which sells overseas over 50 areas. Shenzhen fuxentek telepathic technology ltd., acting as the agent of fosentek telemetry control ltd., specializes in the promotion and sale of its sensor products in the continental region. Fusentekor provides not only mini-pressure sensors, thrust sensors, static twisters, dynamic twisters, conventional measuring sensors such as heavy sensors, 3d sensors, but also customized solutions tailored to client needs. If you have any needs or questions regarding a gravity sensor, please consult
Common questions:
How long is the shipment due to a change in inventory。
Invoice availability: our division may provide vat-specific and generic invoices。
A dynamic twister sensor, the fytk rectangular channel and the speed channel, can output 0-5v, 0-10v, 4-20ma, and plc is generally able to identify such signals and consult our sales staff if other outputs are needed。
Sensor customization: sensor sizes and measurement ranges can be customized, and the feasibility of customization depends on specific requirements and details of division sales personnel。
