Original plant zf friedrichshafen angle location sensor ang series
Details of zf friedrichshafen sensor products:
I. Angle position sensors
Non-exposure inherent linear exposure angle location sensors with two independent outputs. Sensors work in magnetic fields generated by permanent magnetic materials using the hole effect technique. The linear variation of the voltage output provided by the sensor corresponds to the angle of the input axis。
1. Ang sensor
High-fault tolerance
360 degrees rotate all directions
No mechanical interface
The split guide specification is 20 awg 305 mm (12)
2. An1 sensor
Mono-exposure sensors
Linear output, rotation angle from 50 to 850
Rotate clockwise and counterclockwise
1200 mechanical rotation
3, an8 sensor
Non-contact, programmable
Can rotate continuously
The air gap is 5. 5 mm (0. 22) when used with as500106 i'm not sure
With connector or lead
4. An9 sensor
Non-contact, programmable
Can rotate continuously
The air gap is 5. 5 mm (0. 22) when used with as500106 i'm not sure
Double (redundancy) output
5, as500106 magnetic carrier
Pps shell
Cobalt 28 magnetic
It can be provided separately by magnets or in conjunction with the Čerfu angle sensor
Ii. Speed sensors
Hall effect sensor, designed for applications requiring iron edge detection/approach detection. In addition, irrigation current output is provided。
1. Sensors for electric bicycles
No contact based on hole technology
Higo connector to mark
Anti-shock
Typical air gap 0. 4-1. 8 mm
2 gs 1001 – gs 1002 sensor
Industrial speed sensors
Compatibility with non-stable power supply
Cable or iec connector
The stainless steel shell
3, gs 1005 – gs 1007 sensor
Commercial speed sensors
Compatibility with non-stable power supply
Cable or iec connector
Aluminium anode shell
4, gs 101201 – gs 101202
Industrial speed sensors
Compatibility with non-stable power supply
Wireless or delphi connector
Fibreglass enhanced thermoplastic french shell
5, gs 101205 sensors
Industrial speed sensors
140 0c temperature rating
Delphi connector
Fibreglass enhanced thermoplastic french shell
6, gs 10201 sensor
Industrial speed sensors
Temperature values 140° c
Delphi connector
Glass fibre enhanced thermoplastic shell
Iii. Speed and direction sensors
Hall effect speed and direction sensors can measure the frequency from close to 0 khz to 20 khz. Select from standard products or explore modular-based designs that predetermine important criteria such as axle length, diameter, french position and output interface。
Magnetic proximity (hall) sensors
Single-form non-exposure solid position sensors can use a variety of types of envelopes to work in magnetic fields generated by permanent magnetic materials using the hole effect technique. Sensors provide irrigation current output
Mp1001 sensor
Mp1007 sensor
Mp1013 sensor
Mp1014 sensor
Mp1021 sensor
As1010 motionr magnetic sensor
V. Magnetic sensors close to sensors (drink)
When the magnetic field is applied, the dry spring position sensor with a frequent open or closed contact will change its state. Sensors act as non-closed electrical switches。
Vi. Lin sensors – packages with magnets
Lin series sensors are non-contact linear position sensors with one or two independent outputs. The sensor uses the hole effect technique and magnetic fields generated by magnets. They provide linear shifts corresponding to the motor magnets, which cause linear changes in voltage output。
Original plant zf friedrichshafen angle location sensor ang series