You didn't buy a routerNo routerThe second is hot
Renting accommodation, broadband failure, hotel travel, cable only, no wifi? Many people have experienced this awkward scene of “wifi without internet” — mobile devices such as mobile phones, tablets, smartphones, etc. Are offline, and a router is expensive and occupied. It doesn't cost much. If your computer has a cable card, you can turn it into a wireless router
Understand: prerequisites for computer hotter
A lot of people can get hot spots for all their computers, but there's a central premise: your computer has to have a wireless card. Both desktops and notebooks bring their own wireless cards as long as they can connect to wifi's equipment (some of the old desktops may require additional usb wireless cards, which can be done with dozens of pieces). In addition, computers themselves need to have regular access to the internet — be it connected broadband, mobile hotspots or other networks — so that they can be shared with other equipment as long as they are connected。
Subsystem operation: 3-step fast-start hotspot
The operating logic of different systems is the sameWindows 1011 andMac systemWe'll do it in five minutes:
Windows 10/11
1. Open settings: press win+i shortcuts and quickly remove the system settings interface
Finding mobile hotspots: clicking on the network and internet in the settings list to select the mobile hotspot
Opening and setting: switching on "mobile hotspots " , clicking on "editing" can customise the name and password of the hotspot, and select the frequency range of the hotspot (2. 4g suitable for walling and 5g suitable for near-speed transmission)。
Mac system
Opens the sharing settings: click on the apple icon at the top of the screen, select the system settings and find the sharing under universal
Configure hot spots: check "internet sharing" in the shared list, select your computer's current internet access (e. G. "ethernet") and then tick "wifi"
Start hot spots: click on the wifi right "info" button, set the hotspot name, password and frequency segment, and finally open the "internet sharing" switch。
2 practical techniques for hot spots
Use the computer as a hot spot and have two small skills to improve the experience:
One is to address the problem of equipment not being connected: if other equipment does not find hot spots, check whether the computer's wifi is normal and confirm whether the frequency bands of the hot spots are compatible (some old equipment only supports 2. 4g); and the other is to control the speed of the hot spots: if the network is slow, downloads from the back of the computer, video software can be shut down, and the bandwidth of the hot spots can be given priority。
Three questions and answers
1. Question: does a computer drive hurt a computer? Answer: no. Hotspots are simply a shared function of wireless network cards, which are part of the normal use of computers and do not cause additional damage to hardware, with the sole effect of slightly increasing computer effort。
2. Question: how much equipment can you add up to? Answer: the average windows computer supports up to eight device connections and the mac supports up to 10 devices. The exact number will be limited by the performance of the computer wireless card, the number of connections will increase and the speed of the network will slow down for single devices。
3. Question: are hot spots still available after computer shutdown? Answer: no. Computer hotspots depend on the operation of the computer itself and on network connections, which automatically interrupt once the computer is shut down, grids are disconnected or in dormant mode。
Computer hotspot wifi from wifi to wifi
