Click to top the car repair case, get a full time
There are many tools for debugging the equipment at the workshop, but over 90 per cent of the enterprise tool management is random, and today the tool 5s trail management is shared through graphics。
Let's see if your factory is in such a state
This is a tool to lay dead
Some it dick computer station
Is this a tool to dig a gold mine
If the plant is such a site, the search for the tools will take a considerable amount of time to produce。
Common tools are wasted
[1] debugging equipment: maintenance staff running to find tools = delayed maintenance time = delayed production time = reduced productivity
(ii) altering specifications: when many enterprises change specifications or models, the time taken to find tools or screws is 30-50 per cent, and the real time is not long
Tools: tools for posts a and b, which are waiting = inefficiency
Tool management level
Minimum level
Look at the chart, the tools are on the table, the tools are missing, there's more。
Primary
Look at the diagram, the tools are pre-packaged and organized. But the location of each tool, the name is unknown. This approach is primary。
Medium level
Look at the chart, the tool is managed by 5s, drawing the tracks of the tool, which can be seen at first sight。
There is a disadvantage in this approach, where the instruments are easily misdirected and do not conform to the principle of ease of access and management, resulting in a lack of overall beauty. You'll see. And this chart is not marked。
High level
Look at the figure below, high-level insinuations are imported into the mind, using a white one of the materials, which can't go wrong, can't go wrong. A radish and a pit. And it's clearly marked, and everyone knows that when you stop, find tools, change models, and find them. Increased efficiency。
How to manage tools
The following illustrations are available for your information:
Here's the plank, nails, real good。
Here's the van
The drawers are used for track management materials, black, white, suggested black, dirty. You know。
The chart below uses the 3d space in the cabinet and saves space。
The figure below is a homemade approach, and transparency material can be arranged by advertising companies。
There's more to the chart. See?
The figure below shows an improvement。
The figure below, the 3d space, is wasted and can also be converted to a slope。
How do you draw the trail
Position the tool, hold it, use the oil pen, remember, it's the oil pen on the edge of the tool, and it's okay. Remember to use oil pens, not white pens. Want to know why, try yourself。
The figure below is scania, one of sweden's truck and bus manufacturers, 5s。
Here's the plank. This is good. The tools to change the knife go straight to a treasure, a lot。
