Bora1. 4t maintenance manual 2021
Bora1. 2t maintenance manual 2021
Shinbao taxi 1. 5 maintenance manual 2020-2021
Bora1. 5 maintenance manual 2020-2021
Bora1. 5l maintenance manual 2019-2021
Newborab-ev maintenance manual 2019-2021
Bora1. 5l maintenance manual 2018-2021
Bora1. 4t maintenance manual 2018-2021
Paul's 1. 6 maintenance manual 2016-2021
Power 1. 4t maintenance manual 2016-2021
Bowla 1. 4t maintenance manual 2014-2016
Newborafl1. 6 maintenance manual 2013-2016
Newborafl1. 4 maintenance manual 2013-2016
Bore 2. 0t maintenance manual 2011-2013
Bolai 1. 4t maintenance manual 2011-2013
1. 8t maintenance manual 2011-2013
01
Bora1. 4t maintenance manual 2021
Case of mass bora 1. 4t engine cooling system maintenance
Client description: a car owner reported that his 2021 popular bora 1. 4t vehicle was travelling with an abnormally high water temperature gauge and an overheating warning light on the engine。
Maintenance steps:
The failure diagnosis uses the bora1. 4t maintenance manual 2021 and the preliminary analysis may be related to the cooling fluid cycle, cooling fan working state or thermostat function. The cooling system inspects the cooling fluid to ensure that the cooling fluid is between the lowest and the highest tic. Refrigerated liquid cycling tests start engines to observe the cooling fluid cycle in the cooling system and to check for leakage. The thermostat checks the working state of the thermostats, in accordance with the maintenance manual, to determine whether they can be properly turned on and off. The cooling fans check if the cooling fans are activated when the engine reaches a certain temperature. The radiator is clean and clean outside the heater to ensure that no impurities are blocked, affecting cooling effects. The replacement of components is done in accordance with the instructions of the manual if the thermostat or cooling fans are damaged. The system pressure test performed pressure tests on the cooling system to ensure that there was no leakage. The road test is followed by a road test to monitor the water temperature to ensure that the engine cooling system is back to normal. The water-temperature gauge works normally after feedback from clients and the engine overheating warning light is not activated。
Summary of maintenance:
