Mechanical equipment maintenance system
Principles and requirements for maintenance
1. 1
In order to ensure that mechanical equipment is always in good technical condition and ready for operation and to reduce downtime days
Increase
Mechanical integrity rate
Utilization
Reduction of mechanical wear and tear
It's an extension of the machine's useful life
Reduction in mechanical operation and maintenance costs
Safe production is ensured and maintenance of mechanical equipment must be enhanced
1. 2
Mechanical maintenance must be performed
Rest and recuperation, prevention
Principle of regular maintenance, enforcement, correct handling
The relationship between use, maintenance and repair does not allow only non-suspension, but only maintenance
1. 3
Each class must perform maintenance work for all types of machinery according to mechanical maintenance protocols and type of maintenance
It is not necessary to delay
Special
(a) the situation requires the approval of the specialized staff to extend the maintenance, but generally not more than half of the required interval
1. 4
The maintenance machinery shall be of quality and shall be carried out on a project-by-project basis and shall not be compromised or compromised. Maintenance project, maintenance
Problems identified in quality and maintenance should be recorded and reported to the department's specialties
1. 5
Maintenance staff and services should do so
Three-and-one inspections (self-inspection, cross-checking, specialized inspection and one handover qualified)
No, no
(a) disassembly maintenance experience and improve the quality of maintenance
1. 6
The department of asset management regularly monitors and inspects the mechanical maintenance of the units, conducts periodic or irregular spot checks on the quality of maintenance and conducts
The prize is bad。
Implementation and supervision of maintenance operations
2. 1
Mechanical maintenance continues to be promoted
Cleaning, lubricating, adjusting, hardening, preservation
For main content
Cross
Operation, real
Routine and regular maintenance is performed strictly in accordance with the life cycle specified in the statement of use and the inspection maintenance project。
2. 2
Routine maintenance is cleaning and checking before, during and after the operation of the machinery
Main checks are critical
Vulnerable parts and components
(e. G. Mechanical safety devices), cooling fluids, lubricants, fuel quantity, instrumentation instructions, etc. Routine maintenance by operator
Self-completion and careful completion of mechanical routine maintenance records。
2. 3
Level-i maintenance: extensive clean, secure and lubricated operations and partial adjustment operations to maintain mechanical integrity
The state of art. Use unit asset managers issued under maintenance plan
Mechanical equipment maintenance, lubrication notice orders
Down to fuck
The working group is carried out by the operator himself and is supervised by the operating class commander。
2. 4
Secondary maintenance: includes all elements of primary maintenance, which are inspected and adapted to maintain mechanical components, institutions, facilities and facilities
The parts have good working performance. By the asset manager of the user unit
"mechanical equipment maintenance
Under lubrication notice order
Arrival of the operational unit is done mainly by the operator himself, who may commission it to the repair department if he has difficulty in doing so
Use of unit asset managers, operating class chiefs to monitor。
2. 5
Other maintenance
2. 5. 1
Seasonal change maintenance: main elements include replacement of lubricant, fuel fuel for the applicable season, introduction of anti-frozen measures and additional anti-frozen facilities
Wait. It is organized by the user department and is inspected and supervised by the operator。
2. 5. 2
Routine maintenance: the new machine and major repair machinery must be maintained after completion of the completion period, the main element of which is liquidation
Cleaning, securing, adjusting and replacing lubricants were done by the user department, checked by the asset manager and supervised by the asset management department。
2. 5. 3
Transfer maintenance: transfer maintenance shall be performed prior to the transfer of the mechanical site and the work may be performed in accordance with the technical condition of the machinery
Maintenance
Protection may be provided if necessary. Transfer maintenance is organized by mechanical removal units and is inspected by project department, asset manager
This is monitored by the asset management department。
2. 5. 4
Dismantling maintenance: decommissioning and storage machines should be maintained, mainly cleaning, preservation, damp, etc. Inventory machinery funded
The ministry of production management commissioned maintenance, while the remaining machinery was maintained by the use department。
2. 6
Upon completion of the maintenance plan, the maintenance plan is subject to careful inspection and acceptance, and relevant information is prepared to be fully documented
True。
The equipment is one of the three factors of productivity
It is a material means of social production。
The equipment is well managed
Number of products to enterprises
Economic and technological indicators, such as quantity, quality and cost, have a decisive impact, and are therefore subject to strict operational patterns of equipment
