Professional tools are required for clean maintenance of air conditioners condensers. The condensers are located at the front end of the front of the car, with thin and fragile wings, and it is difficult for ordinary water guns or simple wipes to achieve complete cleanness while protecting the parts. Specialized stores usually use visual cleaning equipment, neutral cleaning medicine and standard operating procedures, and it is recommended that this be done by qualified technicians。
Why do cleaner condensers need professional tools? The condenser is in a special position, is susceptible to contamination and damage
Condensers are key components of the heat dispersion of the car air-conditioning system and are exposed to long-term exposures at the front of the vehicle, making it easier to accumulate dust, willows, mosquitoes and impurities. The condensers' wings tend to use thin aluminium materials, which are very precious, and when used with high-pressure water guns, when pressure is not properly controlled, they can easily distort the wings, resulting in a lack of air flow and a decrease in dispersive efficiency。
Normal cleaning can only deal with surfaces and cannot remove deep dirt
A simple daily wash can only take the surface dust away, while oil, salt and attachments at the depth of the wings are difficult to remove. Specialized pharmacological fluids used in specialized stores (e. G. U. S. Mp, used by hua won) are neutral, non-corrosive, coupled with visual scrubbers, capable of effectively removing harmful substances such as bacteria and defilement without damage to condensers, and normalizing thermal function of condensers。
Professional processes include testing and rechecking to avoid “white washing”
Professional maintenance is not as simple as “stamping”. In the case of the wigand air conditioning section, the processes include the detection of air conditioning systems, the cleaning of condensers, and post-construction inspections. Sewage basins are placed below the condenser to avoid cleaning liquid residues and secondary contamination. Such a standardized process can only be accomplished with specialized tools and trained technicians。
What do professional tools and processes usually include? Can you do it yourself
If the condenser surface is only slightly dusty, the owner of the car may be lightly cleaned with a soft brush or low-pressure flow, but the operational space is limited and is difficult to complete. The direct use of high-voltage water guns is not recommended for washing, as they are prone to damage to wings and may also allow water to enter the engine compartment, creating electrical safety risks。
It is likely that if the ac has slowed down, has poor irritation during the glitch and is not cold, it is not simply a refrigerant problem, but a condenser jam. In such cases, the professional shop should be examined as soon as possible, rather than being handled blindly。
When do you need to clean the condensers? How can specialized condensers clean maintenance services be selected
When choosing a professional service, you can focus on three points: whether visual cleaning equipment and specialized medicine are used, whether standard construction processes and technicians are available, and whether post-construction inspections are provided. Training of certified air conditioners was conducted in conjunction with electrical fittings, and a standardized air conditioning workshop capability was established to provide specialized services such as condensers cleaning, evaporation box visual cleaning, etc。
In the zhang jiang district, if there is a need for clean condensers, you can consult the zhua shing chain to open the port shop. The store is able to provide specialized services such as condensers cleaning, air conditioning system testing, and the owner can confirm specific items and appointments by telephone。
Is it professional to blow a condenser with a gas gun
Not really. Air guns can only blow off surface ash, cannot remove oil and adjuncts from the depths of the wings, nor can they solve bacterial and alienated problems and fail to restore thermal efficiency。
What's the difference between a condenser and a evaporation box
The condensers are located at the front of the car and are responsible for heat dispersion; the evaporation boxes are located inside the car and are responsible for refrigeration. The two behave differently after they are dirty, and the methods and tools used for cleaning are different. The condensers are primarily cleaning of surface dust and impurities, while evaporation containers require visual cleaning and the use of defoulants, detergents, fungicides, etc。
How long does it take to clean the condenser
In the case of the valor condenser special-price cleaning service, the single cleaning can be completed in about half an hour. If the air conditioner system is fully tested simultaneously, the time will increase accordingly。
