Many households use wall-mounted air-conditioning, which has advantages such as being free of installation and being easier to match with interior decorations, which is the reason most users choose. But when it's too long, it's gonna have to be removed and repaired
Refrigerants in air conditioners must be collected in outdoors, both in winter and summer. The breaker shall be preceded by the activation of an empty wrecker, which may be used for remote control to establish a cooling state, pending the operation of the compressor for 5 to 10 minutes, and after normal cooling, the removal of the shield from the external tube and the gas tube interface with the wrench, the closing of the closed valve for the high pressure pipe (detail), the opening of the outer tube after 1 minute, the immediate closure of the low pressure tube (bold) to the valve, the same rapid shutdown, the removal of the power plug, and the tightening of the safety cap with the wrench until the recovery of the refrigerant is completed. (in the case of winter, it would be useful to have warm towels to cover the temperature sensors of the interior aircraft, and then control the cold conditions to set the engine on.) it could also be opened with a mandatory start-up button on the interior aircraft, with any other malfunctions in the same observation room and outside. It's not like it's a bad idea。
Refrigerants can be recovered and indoor machines removed. Connecting the interior with a wrench to the locknail to be spun, protecting the threads attached to the inside with a ready sealed sodium sodium sodium sodium to protect the threads attached to the joints from breaking the threads during the handling; then removing the control lines with a cross. It should also be marked to avoid errors during installation. If the signal line or the power line is wrong, it will cause the external machine to fail or the machine to become uncontrolled. The inner panel is generally more secure and difficult to unload; it is unloaded, placed on a flat concrete floor, then gently flattened and corrected。
Outsiders should be removed by professional refrigeration repairers with safety guarantees. When the offline connects to the lockmother, the threads of the link to the offline are protected by a ready sealed sodium spin. And with the wrench, the fixed screws on the outside foot. When detaching and dropping off the outdoors, it is advisable to hang with a rope, which should be balanced, avoid vibrations, bumps and be safe. The out-of-house air conditioners should be slowly taken over and the four ports of the connectors should be sealed with four plugs ready to prevent dust and water from entering the air. Put it on your head and then put it in a plastic bag so that it can be moved。
These are the steps of dismantling wall-mounted air conditioners, which we hope will help. As long as the machine works, there will always be malfunctions, so time-bound dismantling and overhaul is necessary, and normal maintenance is required to ensure normal use of air conditioning, of course on its own
