In-house maintenance code details for toshiba copier:
Basic maintenance code operations open the power at the same time as press 0 and 1: panel lights are all lit and cleared/detonated. Pressing 0 and 2 at the same time to open the power: the machine enters the aging mode, displays ag, and press 09 to release. Open the power at the same time by 0 and 3 or 04: enter the input/output check to show ch and enter different codes to initiate different components, such as flashlights, 0333. Press 0 and 6 at the same time to open the power: force start. Pressing 0 and 7 at the same time to open the power: autoscript aging, display ag, press 09 to exit。
Widget control code: 1on,11offf main feeder: 2on,12foff positioning zipplener: 3on,13offf colour demotor: 6on,16foff total cooling fans: 7on,17offf press 10 scanner: 20, 50% by p-key, 200% by p-key
Iii. Specific maintenance mode replacement carrier: the power switch is also opened at 05, the panel displays aj, and automatic adjustments are made and modified values are stored. Clear maintenance signals: the power switch is also activated at 08, the panel displays ad, auto-adjusted and stored changes, and the maintenance cycle is reset to eliminate the signal。
Adjustment code exposure adjustment: includes manual and automatic exposure adjustment, range 0~255, standard 128. Fence bias output, reprint voltage adjustment, etc.: range 0-255, adjusted as necessary。
C41/c43/c44: errors relating to the thermal resistance or to the photolights c54/c55: errors between the page breaker or autorelator and the main cpu
The above is a detailed analysis of the internal maintenance codes for the toshiba copier, which help to quickly locate and resolve copier malfunctions。
