The hot shower tap has gradually replaced the position of traditional shower flowers in the home life because of the high temperature and ease of use. It is known that the main function of the hot shower tap is its valve core, and that, in case of a problem with the hot valve core, the whole hot shower tap is largely paralysed, and we need to replace the hot shower tap with a new hot core. Here's how you share the "heart" of a hot shower with a tap。
How to disassembly and install the "heart" of a hot shower with water taps
First: turn off the total water valve, then pull down the red and blue mark around 8 mm on the hot shower tap, then untie the fixed screws with a single-word screwdriver, take the handle, then remove the core of the hot shower tap with a live wrench, put the upper part of the cap on the wrench, and remove the corset from it。
Two: when you take it down, you'll see a circle of blue rubber at the base of the thermostat core. Usually on the left side of the core is red rubber and on the right is blue rubber. So when replacing the heating valve core, be careful not to reverse the direction, and when the new heating valve core is installed, the handle is plugged in, the hand wheel is reoriented, the screw is on, and the right blue lid is covered, so that the new heating valve core is replaced。
The above is how the warm showers will be replaced by the faucet valves. It is necessary to learn the little tricks of these lives because the hot showers are often used in every family. Of course, if you can't replace the hot shower with the hot tuber, you may need a new one, and you may want to come to the shenzhen showroom at jody's. The hot shower with the hot shower with a new type of memory alloy (sma) spring-spill core, which is not only responsive, but also has a long life, and can be reached by clicking on the right-hand guest or telephone line on the web page
