Hddreg hard drive regeneratorHard disks with physical bad fan areas can be repaired without any impact on the data of the subsectors during the restoration process. Today we'll teach you how to fix it with the hddreg hard driveComputer hard diskI don't know。
Insert a startup disk that has been made using u-starter software into the computer usb plugin, then turn it on or restart the computer, and then press the corresponding start shortcut to select the start of a starter window, and then the computer will start from the u-started main menu interface
In the options shown in the figure above, we press back keys after moving the cursor to the [08] runs the hard disk memory detection scanning tool menu and then moving the cursor to the [02] runs the hard disk reg 2011 menu;
When you run the hard drive regenerator, you can see two drives, one of which is the disk shown in sub-editor u and the other computer hard drive, which you can judge by the size of the disk. Here, what we need to repair is the computer hard drive, so we need to enter 2 in the brackets of "input selection" and press the return key to confirm it;
All we have to do is scan the tools and fix the selected hard drive
The hddreg hard drive regenerator automatically detects the hard drive. We just have to wait 5-10 minutes patiently to suspend or terminate the mission by pressing the "esc" key at any time during the scan, since the scan and restoration are carried out simultaneously, so the process of repairing after the scan has been completed is over. Hard disk scan process
So, the way to scan and repair the computer hard drive using the hddreg hard drive is over. Have you learned?
