4 blocking of factory bad roads (p-list)
5 blocking magnetic head
6 blocking magnetic path
7 block the bad sector
8 reword to bios (parameters)
9 resize iba
Ten, change the sn
View or modify negative header information
Establishment of a cataloguec: pc3000;
2. Copy pc3000 package with all subdirectories to c:pc3000;
3. Formatting workspace partitions (over 200m) and installing dos system files;
Copy vgaga emm386. Exe heem. Sys files to c:pc30000k;
5. Editing of config. Sys documents, which must include:
Device=c:pc3000himem. Sys
Dvice=c:pc3000em386. Exe
Dos is high, umm..
Buffers = 60
Files=45
6. Editor of the autoexec. Bat document, it is recommended that:
Path c: pc 3000; c: dos; c:
7 edition pc3000. Bat, recommends the following:
Cd c: c: pc3000
Vgaga
Pcdosumu 2 (designate pc30000at to fix hard disk interface to which side, 1=ide1, 2=ide2)
Shell (pc3000 shell shell program, general transfer to other sub-programmes)
After restarting to dos, input pc3000 automatically enters the pc3000 module selection menu。
The detailed methodology used by selfscan in repairing maxtor:
1. Set a security model。
Loading of ldr and ram files into standard mode。
3. Check the structure and write down the number of modules that cannot be correctly read, with the additional 33# module always included。
4. Writing modules (provided that there is a good back-up module)。
5. Clear g-list and p-list (possibly unsuccessful)。
6. Choose start selfscan, turn off the power, and set the jump to normal mode re-open the power. Checking selfscan's state, it's about 10,000 in a minute, and if it doesn't, it's probably not a complete module or sa is bad。
7. Choose stop selfscan。
Turn off the power and set the jumper to normal mode; turn on the power, normal, ok!
Rationale: at the start of selfscan, the internal management process in the hard drive automatically initializes many internal parameters and puts them in sa, so it solves problems that cannot be resolved by external processes
Common problems
How to generate *. Ldr and *. Ram files?
Only the modules of maxtor dsp / poker and ibm can generate ldr and ram files, while the other modules are currently available only by acelab。
The methods generated are as follows:
Access a good disk and select the corresponding module for the main menu
Select 1-1 and enter file name to generate ram
Select 1-4 and enter a filename to generate ldrs
