The guangzhou electronic technology introduction to the vishay celtron single-point heavy sensor applies to industrial or commercial weighing applications of medium range (200kg). The following are its key performance characteristics and selected recommendations:
Core performance characteristics
1. Measurement and precision
Scaled capacity: 200kg
Consolidated precision: usually 0. 02% fs (full range) or higher, depending on the model suffix (e. G. Lps 200kg c3)。
Non-linear, delayed: 0. 02% fs (typical value)。
2. Structure design
Single-point structure: suitable for applications such as platform scales, scales, etc., insensitive to load positions, easy to install。
Materials: alloy steel or stainless steel (optional corrosion resistant type), protection level ip65/ip67 (dustproof protection)。
Electrical properties
Output sensitivity: 2 mv/v (standard), with incentive voltage (usually 5,12 vdc)。
Incentive voltage: 10vdc (maximum 15vdc)。
Temperature compensation range: 10°c ~ + 40°c (a wide temperature model of up to 30°c ~ + 70°c)。
4. Mechanical parameters
Safe overload: 150% fs, limit overload: 300% fs。
Worms: ±0. 02% fs/30min (typical)。
5. Certification and compliance
Compliance with measures such as oiml r60, ntep (specific models to be identified)。
Strength and fit scenario
Strengths:
High stability and repetitiveness, low long-term use of drift。
Whispering brands are highly reliable and resistant to interference (emc performance)。
For dynamic or static weighing (e. G., weighting of production lines, storage logistics)。
Typical application:
Industrial scales, packaging scales, sorting equipment。
Medical equipment, food processing (requires stainless steel models)。
Selective care
1. Model suffix:
Identification of specific models (e. G. Lps 200kg c3 or lps 200kg s) with different suffixes that may vary between output lines (4 lines/6), contact types or protection levels。
2. Supporting instruments:
Matches a reset or monitor (e. G., the ind570 series of vishay) that supports 2 mv/v input。
3. Environmental adaptation:
Corrosive environment select stainless steel (e. G. Lps 200kg ss)。
Isp67 protection is required in high humidity settings。
4. Installation requirements:
Ensure that the base level is flat and that the side forces do not affect accuracy。
