A shallow analysis of the cause of the wind-drive and the response
Summary: wind-leaders are important auxiliary equipment, which is widely used in areas such as power generation, ventilation, dust removal, etc
The normal operation is closely related to pressure control and electrical output of the output gas. Operation at boiler windmaker equipment
Maintenance is ongoing. After speed failure, the back of the leaf may form a vortex zone, increase fluid resistance and reduce the wind engine. Out
Power and export pressure. A series of changes caused by speed failure threatened the proper functioning of the generator unit. Through recognition
Do not cause wind failure and specific signs of failure, detect failure in a timely manner during the prejudicing period or fail
Immediate response at the time of occurrence and measures commensurate with the cause of the failure to ensure the reliable operation and downfall of the transmitter
Low risk of abnormality. This paper discusses the speed failure of the winder and briefly discusses the common problem
The cause of the delay was an analysis of the preventive response to the failure。
Keywords: boiler winder; slowness; asthma
Introduction
Our economy continues to grow, and the results of our projects are remarkable, with workers in tunnels, mines, factories, etc
Windmaker is used during the journey. However, there are many malfunctions in the windmaker, among which the speeding of the boiler is a problem
In general. These failures threaten the safe operation of the equipment, resulting in excessive energy consumption and insecurity
Development. In order to ensure the safe and reliable operation of equipment, it is necessary to study the reasons for the speeding of our boilers
It is analysed and processed to ensure the safe operation of the equipment。
1.
The working principles of boilers
The boiler winder is a machine that relies on electrically driven input to increase the flue pressure and to vent it out
The machine. The boilers are mainly used for ventilation, dust removal and cooling, working principles and turbine compressors
The rationale is similar. In large-fired power plants, axle winder with fixed or moving blades is a pot
Major equipment for boilers. The work of the boiler's winder is that of the wing lift, the flow of the gas
The direction is to introduce the chimney. As the boiler guides the blade shape of the fan and the leaf of the boiler guides the fan running
The blades are very similar, so the blades of the boiler are attached to the wings. The gas is at the tip of the wing
Two parts. One is below the beam and the other is at the top of the beam. From both parts
The gas is reconnected at the tail of the wing. But because the lower surface of the wings is longer than the upper surface
