Fuscler(fuji xerox) printers, after replacing new ink powder, still encounter signs such as “ink shortage” “need to replace ink powder” “material life expires” and are even unable to print directly. This is often not a problem with ink quality, but rather a result of the ink counter that does not reset zero or drive the cache abnormally. This paper describes the reasons and practical ways of repositioning fuscler printers after changing ink。
I. Why did you change the ink and return to zero
Ink counting mechanisms are in place within the fuscler laser printers, the main functions of which include:
1. Statistics of ink usage
2. Remind users to replace their consumables in a timely manner
3. To prevent printing quality from being affected by ink deficiency
When the printer judges that the ink has reached the end of its life, even if you have installed an entirely new toner box, if the counter data is not reset, the system will continue to run according to the old data, thus continuing to report errors。
Ii. Common method of zero-pointing ink ink in a fujichelle printer
The operation of different models varies slightly, and the following method applies to most fuscler laser printers。
Method i: manual clean-up into maintenance mode (generally effective)
1. Closure of printer power
2 hold on menu/menu or return/back
Three, open the power at the same time and keep the key 5-10 seconds
4. Access to maintenance or engineering (maintenance mode)
Five. Find toNer reet / counter reet / life reet options
6. Select and confirm zero ink colours or models
7. Re-launch printers
Method ii: clear cache update driver
A number of user feedbacks: even after the ink has been returned, the printer still points to an abnormal or abnormal state of consumption. This is often associated with computer-end drive caches or drive anomalies. For drive and cache-induced anomalies, the printer drive can be detected through the first key of the professional tool printer guard, the remaining print jobs and drive caches can be removed, and the printer drive can be automatically matched and updated for the current system. The steps are as follows:
Smart fix printer problems, automatically install printer-driven
Download now
Good rate of 97%
Number of downloads: 3638245
1. Click on the top download button to install and open the-printer guard, and then click on the "purpose immediate detection" under "intelligence repair installation"
2. Software automatically detects printer model matching drives and detects printer problems, and users can install new drivers by clicking on " one-click fixes" and solve printer-related problems
When the fuscler printer changes in toners and still displays anomalies, the drive repair and cache clean-up through the printer guard avoids the system continuing to read old material information, thereby making the reuse operation truly effective。
Method iii: partial model supports automatic duplicates
Some of the newer fuscler printers will automatically pop up when they install the original ink:
"new toner detected, reset counter?"
Zero can be completed with just confirmation based on screen tips。
Method iv: re-installation of toner cartridge trigger recognition
If the printer fails to correctly identify the new ink, try:
1. Turning off power
2. Remove powder cartridges
3. Clean chips and contact points
Re-installation and re-opening
This method may provide temporary solutions in some models but is not suitable for long-term reliance。
Iii. Recommendations for day-to-day use and maintenance
1. The need for repositioning is checked in a timely manner following the replacement of ink powder
2. Regularly update printer drives to avoid system compatibility problems
3. Unusual pre-screening drives and caches before judging hardware
4. Avoid frequent mandatory printing and prevent miscalculation of material consumption
Good usage can effectively reduce the problem of changing ink without printing。
The change of ink for the fuscler printer and its non-replacement is a very common problem for users. Ink mills emptied by entering maintenance mode are in most cases resolved. However, if there is still an anomaly, it is often associated with computer-driven caches or driver version problems. At this point, the removal of caches and the replacement drive by the printer guard will remove the hazard completely at the system level and allow the printer to quickly resume normal work。
FusclerPrinter resetZero fusschell switch to ink ink counter zero printer cache cleanup
