Specific steps for use are as follows:
The first step was to open the hood of the car and find the water tank for comment. The general water tank apostilles are located in the engine compartment and will be clearly marked。
The second step is the slow discharge of leaks from water tanks through the funnel. The inflow is determined on the basis of the recommendations of the product description, and the amount of leakage used may vary from brand to model。
Step three, drop the plug and then add it in proportionRefrigerated fluidI don't know. When adding cooling fluids, be careful to observe the liquid level and ensure that it is within the appropriate range。
Step four, start the engine, let the engine run for a while. In the course of operation, the leakant flows to various parts of the water tank as the cooling fluid circulates, blocking the leak. It is generally recommended that engines be operated for approximately 15-30 minutes, with reference to the product description at the specified time。
There's a lot of leaks in water tanksAttention:
First of all, it is important to carefully read the product specifications to understand their scope of application, methods of use and care. Different leaks may have different requirements for water tank materials and may cause damage to water tanks if used inappropriately。
Second, when plugs and cooling fluids are added, the spill is avoided in order to avoid the erosion of other parts in the engine compartment. If spilled, it should be cleaned in time。
Finally, during the engine operation, changes in the water temperature table are closely observed. If the water is too hot, the engine should be stopped immediately and other problems checked。
The use of leaks is only a temporary solution, and if leaks in water tanks are serious, it is recommended that they be made available in a timely mannerVehicle maintenanceThe shop performs repairs so as not to interfere with normal use of the car。
