New c200l maintenance light removal method
1. Running motor engines。
2. Convert the internal dashboard to a mileage page。
3. In order to better save the page, you must press the "ok" button to the left of the car steering wheel with your right hand and the "telephone" button to the right of the car steering wheel for a few seconds。
4. Select assystplus in the maintenance menu and press ok to enter。
5. Select " complete maintenance " to press " ok " to enter。
6. Select “set of maintenance”。
Seven, zero。
New mercedes-type maintenance light removal (applies to old model)
1. Start with the vehicle and then press the key to the left of the internal dashboard twice before turning off the module。
2. There is no need to break the button and then run the vehicle, waiting for a few seconds to hear the sound hint, which will allow calibration。
Once the maintenance lights were on, the vehicle had to be maintained. Not all models can be manually cleared, and some of the models must be coded by equipment commonly used by the manufacturer。
Vehicle technology keeps maintenance requirements to a minimum. Of course, some timely maintenance work still needs to be done, which will also ensure economic development, safety factors and car comfort in the medium-term and later stages. If the natural environment of the vehicle is very poor, it should also be maintained before the light is activated. C180 ac filtering cores are located below the co-pilot glove box. Car air-conditioning cores are part of the car air-conditioning system and serve as a barrier to external impurities and air purification。
Due to differences in environmental contamination, road conditions, climatic characteristics and usage in various regions, vehicles are required to check the cleanness of air-conditioning filters when they are regularly maintained, and air-conditioning filters can be replaced when they travel 10,000 to 20,000 km. Replacement of air-conditioning filters is recommended for the summer and winter before the use of air conditioners. That's two times a year。
Benz c180 air-conditioning core change course:
Find the co-pilot glove box。
2. There is a subsequent need to remove the plaque and to remove the rigidity above it before dismantling it。
3. Remove the floor before removing the empty filter。
Remove the shield and remove the filter core。
Note: replacement of new air conditioner filter cores. When installed, the font on the filter core is directed to the owner and the back-up is ineffective。
