Beijing steel plant gates, 4 mainstream options: industrial upgrading doorsCurtain doorI've got an electric smoothing door. In the beijing region, for example, the gate costs range from tens to tens of thousands, with the wrong door, the van failing to enter, the winter leaks, and the weather is bad. Many of the owners built the factory without careful choice of the door, and later the door was expensive and cumbersome. Here's the comparison and selection of the four doors。
The steel-structured plant industry lifts the grey doors
One, four gates
Table
In the case of the beijing region, for example, plants with a temperature-conserving demand are selected to upgrade the doors, with a limited budget for the roll-out doors and the flat-porting door。
Industry promotion doors (recommended)
Advantages:
Disadvantages:
Price:
Suitable: main door for plant buildings with heating and heating needs, common door for logistics warehouses。
Volume doors (economic benefits)
Advantages:
Disadvantages:
Price:
Suitability: plants with limited budget, which do not require temperature protection, or are used as warehouses to block doors。
Steel structural plant truck to and from the gate
Iv. Electronic transition door and pull
Electric level transfer door:
Push the door (manual):
Open the door:
V. How to fit the gate (key)
Table
Points:
The car will be fixed, the door-size hole will be set at the height of the "high car + 0. 5 m" (remain amount) by the "wide car + 1 m" (right turn) truck entering and leaving, the door hole 5 x 5 m above the door hole (need to upgrade the door) vi, the door cost budget
Table
1,000 flats, main gate + side door + side door, total of about 20,000-5,000, or 2-5% of total construction price。
Power level transfer door for steel structural plants
Vii. The hospital instrument
Table
Focus of acceptance and inspection:
Viii. Common issues
Q: what's better for a roll door and a lift door? A: a warm, commonly used door selection; limited budget for a roll door selection. It's twice as expensive, but it's safe and durable。
Q: what kind of door is in a gate hole? A:8 m or more, an electric smoothing door or a large roll. It is better to have a horizontal door open。
Q: what about the winter leaks in the gates? The leak is mainly due to the ageing of the seal。
Q: what about the door? A: poor quality or installation problems. We're looking for a factory. We're looking for an insurance switch. Branding and quality assurance periods (general 1-2 years) during door selection。
Steel structural plant door selection information diagrams to upgrade the curtains of the doors the door
Summary
4 options: industrial lift doors (recommended, $800-2000/ flat), roll doors (economic, $300-800/ flat), electric smoothing doors (door holes, $100-2500/ flat), flat doors (small doors). The size of the door hole is by car: 4. 2 metres 4x4 metres, 9. 6 metres 5x5 metres and 6 x 6 metres half-mounted. There is a temperature-preserving need to select an upgrade door and a limited budget to select a volume door. The cost of the gate is 2-5% of the total price, and the choice is later. The beijing region needs to contact us, the gates and the building together。
What kind of factory door did you choose? Talk to the comment section。
