Hello, welcome toPeanut Shell B2B Foreign Trade Network_Professional B2B E-commerce Platform_Free B2B Information Publishing Network!
18951535724

Guidelines for upgrading the activity rate of oil pine transfer: key planting techniques based on co

   2026-11-06 NetworkingName1400
Key Point:PinesPackaging transplantation techniques have been summed up; in recent years, the condition of the forested land has been declining, mostly in arid and semi-modetic slopes, and the rate of forestation is difficult to guarantee. In order to improve the quality of oil pine afforestation, the use of container planting is one of the main ways to improve the quality of oil pine afforestation. In recent years, we have been bold in adopting new techno

PinesPackaging transplantation techniques have been summed up; in recent years, the condition of the forested land has been declining, mostly in arid and semi-modetic slopes, and the rate of forestation is difficult to guarantee. In order to improve the quality of oil pine afforestation, the use of container planting is one of the main ways to improve the quality of oil pine afforestation. In recent years, we have been bold in adopting new technologies and successfully nurturing 500,000 bags of oil pine containers for transplantation. The rate of afforestation activity increased by 30 - 50 per cent following comparative tests. However, good container seedlings need to be kept high quality and managed on a daily basis. Some of our practices are described below:

I. Hold and bed

A month before the bed is made, the nursery is to be turned deep at a depth of 20-30 cm, and the roots, stones, pieces of soil are to be removed and flattened. In order to facilitate management and operations, the bed should preferably be 540 cm long and 120 cm wide, i. E., two bags wide and three bags long. The bed is 30 cm apart and the middle is 40 cm wide. Beds may be flat or low, but in arid areas, low beds are more appropriate because of a certain height of the packagings, which are actually flatbeds, and are used to save the bed and save the water, which can also be used in dry seasons. , you want the bed to be flat and solid. When the bed surface is ready, 2 ­­­­-3% of the sulfate sub-iron solution 4-5kg/m3 is sprayed。

Ii. The selection of matrices

The matrix, also known as nutrient soil, is an important link in the success or failure of the container。

(i) selection

There are many raw materials and formulations for the formulation of the matrix, but the pine soil is ideal. It is not appropriate to use sand or adhesive soil only as a matrix in order to make the matrix better ventilated and non-dispersible during seeding. On a comparative basis, 60 per cent of woodland is combined with 40 per cent of yellow soil, which is the most effective。

All the matrices must be sifted and then fully mixed。

(ii) substrate disinfection

This is the key to the prevention of laxity of oil and is an important component of container seedlings, and therefore the matrix has to be sterilized. There are many ways of disinfecting, and we use iron sulphate for disinfection. Solvent sprays with a dryer matrix concentration of 2 to 3 per cent, 50 kg/m3 pharmacies, and side flips. In order to prevent the emergence of mudslides, the liquids are fully mixed with the matrix; when the matrix is wet, the iron sulphate can be mixed into powder and the matrix at 1 - 1. 5 kg/m3, followed by a matrix stack of 1 - 2 days。

(iii) fertilisation

To meet the nutrient needs of the trees throughout their growth and development, especially for nitrogen and phosphorus in the early stages of life, we used calcium phosphate for organic and nitrogen fertilizer. Specifically, calcium phosphate 1-2kg/m3 is added to fully decomposed and disinfected organic fertilizers, and ammonium nitrate is added to a full mixture of 0. 5 kg/m3 for 1 to 2 days before mixing into the matrix. In this way, all calcium phosphate particles are packaged with organic fertilizers that reduce direct contact between calcium phosphate and earth particles, thus avoiding soil fixation of active phosphorus. At the same time, calcium perphosphate prevents nitrogen losses. Sterilization of organic fertilizers is the same as the matrix and uses 20 kg/m3。

(iv) water spray

When the matrix is dry, water is sprayed in combination with disinfection to facilitate bagging。

Iii. Procurement and transport of summers

Saplings are the basis for the success or failure of transplantation, and they must be planted and grown, and must be turned off。

1. A choice is made to purchase a two-year seedling (or one-year-old) i and ii-grade seedling with a strong and developed root. The better the quality of the tree, the more resistant it is, the easier it is to live。

2. The seedling shall follow its roots, and the person shall be held responsible for removing the embroidery of the oil pine tree, the length of its fine roots, and then impregnating it into the abt root powder solution. After a few minutes of immersion, the mud is bound and the soil is fabricated in time. During seedlings, the roots of the trees are not exposed to sunlight。

3. Battered seedlings shall be combined in small plastic bags prior to loading to ensure that the roots of the seedlings are not lost. When the road is far away, it is protected by wet grass bags。

4. The seedlings shall be used as far as possible to ensure that they are planted during the day. For those who cannot be fully planted on the same day, false planting is carried out in a timely manner, and water is sprayed on the leaves twice a day, early 10 a. M. And after 4 p. M。

Iv. Bagging and planting

Packaging and planting is a very cumbersome and highly engineering work, an important part of container breeding as distinct from normal seedlings, and a key process related to the success or failure of container breeding。

(i) bags

The two men pulled the whole bag away gently, leaving each hole in the bag with a standard hexagonal shape, which was then fixed on the bedside. Special care should be taken to pull the bag, and the pressure should be even and not too strong, lest the bag be broken or the gap between the bag and the bag be pulled open。

(ii) package planting

When the bag is secured, the seedling is taken and the tree is placed in each bag by size. Packaging cannot be completed once, and must be laid at least three times before it is solid. The bag should be packed with a smooth seedling to spread the roots. The soil must be evenly laid, otherwise the bags and bags will be squeezed on each other and the bags will be deformed。

(iii) packing

The bag should be fitted with a stick with a diameter of 1 to 1. 5 cm, too slow, too rough. The bags must be in order, they must be in the middle, then on both sides, from the inside to the outside, and they must not be plattered. Otherwise, the outside bag would be squeezed into the inside, deforming the inside. The bag should be evenly balanced so as not to break or deform the bag。

V. Shrimp management

(i) spraying and spraying

Upon the completion of the planting of the seedlings, water is to be poured in a timely manner, using a method of less than one penetration (usually three to five days) to ensure that the roots of the tree are wet. When the trees are fully operational, the flood time interval can be extended once to 7 to 9 days, during which the surface soil will be sprayed in a timely manner if it is dry and the surface soil will be kept humid. Water spray should stop at a later stage in the growth of the tree。

(ii) spraying

Synthetic disease with 1 per cent of iron sulfate sprayed every 10 days and three times。

(iii) fat pursuit

Fertilizer recovery is based on nutrient requirements at different stages of the growth of the tree. It's usually extra fat。

1. Porting in active condition

The trees require more phosphorus and nitrogen, but they are not followed by fat because they have been applied to a sufficient amount of base fat。

2. Rapid birth period

Starting in early june, the trees are entering their life cycle, requiring large quantities of nitrogen, phosphorus and potassium, which should be followed up in a timely manner according to their growth status. First, 0. 2 per cent of potassium phosphate was sprayed once, after 5-10 days 0. 2 per cent of ammonium nitrate was sprayed, after 5-10 days 0. 3 per cent of potassium phosphate and after 5-10 days 0. 5 per cent of ammonium nitrate。

3. Strangulation period

Starting in late august, the trees moved to a sclerosis period, with the first application of 0. 3 per cent of potassium phosphate, 5-10 days, and the second application of 10 ppm-1 or 3 abt, which ended the whole process。

(iv) grass extraction

Draw grass in a timely manner, in accordance with the principle of “early extraction”. When the tree is small, hold down the base to avoid bringing the seedling out。

Vi. Out of the bed

Water must be pumped before leaving, so that the matrix is fully inhaled, so as to promote seedlings, so as to increase the resilience of containers to drought and increase the rate of afforestation. When seedlings occur, the root line of the outstretched container is removed along the bottom of the container, i. E., it does not damage the root line in the container and it prevents excessive separation of the matrix inside the container。

Vii. Experience

Packaging transplantation should take place before and after the festival。

2. The purchase of saplings is suitable for transport where the climate is colder than at transplant sites。

3. The quality of the trees is critical, with the growth of the strong and the growth of the small and the weak and the low。

4. In order to avoid the tanning of the roots of the trees, the tanning of the twilight seedlings takes 10 to 30 minutes in the sun and all the deaths are planted, with “water and water”。

5. Packagings shall be solid layer by layer and, if the bottom is not so solid, they shall be easily distributed and cannot be planted up the mountain。

[synopsis by author] white cloud (1976 -- ), male, university degree, currently deputy director-general of the provincial authority for the conservation of nature and tea in shanxi, and assistant engineer of forestry. (thematic topic of oil pine cultivation)

 
ReportFavorite 0Tip 0Comment 0
>Related Comments
No comments yet, be the first to comment
>SimilarEncyclopedia
Featured Images
RecommendedEncyclopedia
Table of Contents16 sections