Hello, welcome toPeanut Shell B2B Foreign Trade Network_Professional B2B E-commerce Platform_Free B2B Information Publishing Network!
18951535724

Exploration of soil microorganisms: detailed and standardized sampling techniques and processes

   2026-11-19 NetworkingName1700
Key Point:1. Soil micro-organisms study soil micro-organisms in soil collection methods to regulate the transport and storage of soil samples. Soil micro-organisms are often transported from the point of collection to the laboratory for a certain period of time. The transport of soil micro-organisms inevitably affects environmental conditions such as the temperature, moisture, oxygen, etc. Of the soil, so that they are kept as quickly as possible in a dark

1. Soil micro-organisms study soil micro-organisms in soil collection methods to regulate the transport and storage of soil samples. Soil micro-organisms are often transported from the point of collection to the laboratory for a certain period of time. The transport of soil micro-organisms inevitably affects environmental conditions such as the temperature, moisture, oxygen, etc. Of the soil, so that they are kept as quickly as possible in a dark, low-temperature (4c) closed environment, where the water content of the soil remains as stable as possible, and in a dark environment in order to avoid the growth of the algae in the soil under light, which is designed to reduce bacterial reproduction and to maintain the stability of micro-organisms. Usually in polyethylene bags, with pineapple. In addition, physical pressure should be avoided as far as possible in storage, and sample bags should not be stacked too much, so as not to damage the soil's original cortex structure and lead to anaerobic conditions for the bottom samples. Soil samples sampled by microorganisms need to be stored under conditions of 0-4c, so soil samples should be kept in safes or refrigerators in a timely manner (set 0-4)

2, c) and preferably prior processing within one week. If the collection site has facilities such as refrigerators, vacuum dryers for fumigation and ventilation cabinets, it is proposed that microbiological soil samples be evaporated and stored in refrigerated impregnated bottles to facilitate transport. If the collection site does not have facilities such as ventilation cabinets, it is recommended that samples of the soil taken be frozen in incubators after screening to facilitate transport. The specific process is as follows: (1) the incubator and frozen ice sheets are prepared in advance. The ice sheet needs to be refrigerated in advance of 1-2d and can then be replaced by a self-contained bag containing a certain amount of water to be frozen flat as a rule. (2) sampling in accordance with microbiological sampling norms, timely screening of impurities such as root systems, soil animals, etc., to be stored in refrigerators of 0-4c. Soil samples for dna or rna analysis should be applied to dry ice freezes. Soil samples used for rna analysis are used to keep dry ice cool during transport. Soil samples for dna analysis

3. An icebox may also be used for transport. (3) the soil samples are sealed and placed in a incubator on the day of transport, with ice sheets placed on the bottom, around and at the top of the incubator and ice blocks sealed in a self-contained bag to ensure that the samples are exposed to ice plates or blocks. Care is taken to ensure that the soil samples and the ice are sealed separately so as to prevent contamination of the soil samples by water melted en route. (4) upon arrival at destination, samples are promptly placed in the fresh refrigerator (0-4c) to be stored. If sampling conditions permit, the sample fumigation, leaching and subsequent storage in plastic vials can be kept in a standard experimental method, with a freezer of 20c, then transported to the destination according to the above-mentioned process and quickly stored in the freezer (-20c). If no incubators are available, white foam boxes for the transportation of fruits, vegetables, etc. May be chosen, or if sealed. Since the temperature of the foam tank may not be as high as that of the cooler, the road should be further away

4. Additional ice sheets and blocks shall be placed as far as possible during the journey, in a timely manner, and shall require prior confirmation that there is sufficient space in the refrigerator where the samples are collected and where they are to be taken for soil samples or for leachate samples. Particular attention is paid to the sealing of microbiological samples, the placement of melted moisture or other pollution samples from sources. 2. Soil samples shall be processed manually as soon as possible after the sample is processed. Plants, visible soil animals and rock particles in samples are removed prior to screening. A 2 mm screening has been recommended to facilitate the exchange of gases between particles in order to maintain the aerobic state of the soil and to remove small rock, animal and plant fragments. Some organic substances, such as coarse fertilizers or peats, are not easily sifted through 2 mm and should be sifted over 5 mm under damp conditions. If the soil is too wet to be sift, it should be spread out and placed in a slightly mobile air, contributing to its uniform wind drying. It's time to crush the soil with your fingers and to move it so that the surface doesn't get too high

5. Dry, usually at room temperature. If the soil requires wind drying, rather than overdrying, the level of wind drying is sufficient to meet screening requirements. 3. The relatively special process of management and preparation of soil microbiological samples stored in soil is such that the storage of soil microbiological samples during the laboratory analysis phase requires special attention to the control of storage conditions and storage times to ensure that the results are accurate. 2. 1 the conditions for the storage of microbiological samples vary according to the observational indicators of soil microorganisms, the state of samples, etc. The requirements for the conditions for the storage of samples are as follows: 1) microbiological biomass analysis generally requires soil fresh samples to be kept in cold storage around 4c, in freezer rooms or in incubators where ice sheets or blocks are pre-positioned, not below the ice point, so that the freeze does not affect microorganisms. The general stock preservation is also mostly at 4c, which reduces cell reproduction and maintains the stability of micro-organisms. 2) soil microbiological samples

6. Samples of leachate following pre-treatment such as fumigation are frozen in an environment around 20c. 3) in microbiodiversity analysis, the biolog board method, the plfa method or dna sequence are mostly used to preserve soil samples by freezing, and in order to prevent the bacteria from expressing a large number of resistant genes and proteins because of the slow rate of freezing, samples can be frozen quickly (liquid nitrogen cans) and stored in ultra-low temperature refrigerators (-70c). 4) minimize the switch on refrigerators or incubators to ensure constant cryogenic effects. In case of emergencies such as power outages, appropriate emergency response measures are put in place. 5) particular attention should be paid to the sealing of microbiological samples during laboratory preservation and analysis in order to avoid contamination of samples by condensed water vapours or other sources of contamination.) the amount of each sample should not be excessive, and stacking between different samples should be avoided in order to prevent the next sample from forming anaerobic environments as a result of squeeze. 2. 2 microbiological sample storage time 1) short-term protection of samples to be tested

7. The most suitable preservation temperatures for different types of micro-organisms are not the same, and cold temperatures can also cause the death of certain micro-organisms. It has not been established so far that low temperatures can indeed keep the original microbial zone unchanged, so soil micro-organisms are required to be analysed in the shortest time possible. It is generally assumed that soil is fresh 4c for one week and soil leachate 20c for one month. Iso 10381 considers that soil microbiological samples in general can be kept for up to three months before analysis, or -80c if used for dna analysis under 20c conditions. 2) the long-term preservation of soil microbiological samples (greater than 3 months) shall be held under conditions of -20c, -80c or -180c, depending on the length of preservation and the target indicator (table iv-1). It has been confirmed that temperate soil samples will not inhibit microbiological activity (e. G. Ammonia oxidation) in december 20c

Sex. Also, samples for phosphate fatty acid (plfa) and dna analysis can be kept from 1 to 2 years at the 20c. Soil samples for rna analysis can also be kept for 1 to ij2 years at -80c. Soil samples used for dna, rna and plfa analysis were recommended for liquid nitrogen speed freeze. Table iv-1 good gas conditions for the storage of soil samples and reference standards for age indicators in fresh samples (4c) (-20c)a fresh samples (-80) or liquid nitrogen (-180c)a dna 210 rna10 biomass iso 3110 matrix 14240 - inducing 1 breathing iso method 142440 - closic 2 black lymphoid nitroglycing iso 3110 15685 iso 3110 1438 soil iso 3110 breathing iso 16072 curve 17155 de-enzylinization iso2

9, 3753-311 iso 23753-2a soil samples should be separated into samples for subsequent sampling analysis before long-term preservation; plfa analyses should leach fresh soil samples immediately after sampling (2 mm) and leachate can be kept under 20c for months for further separation and gc/m analysis; it is recommended that samples be frozen in liquid nitrogen and then kept under 20c or -80c. B means that it cannot be kept for long periods under this condition. The treatment and storage of fresh samples, such as sub-iron, reversible buttons, reductive sulphur, charred nitrogen, nitrogen nitrate, etc., will change significantly during wind drying and must be analysed with fresh samples. In order to provide a true reflection of some of the physicogenic properties of the soil in the natural state of the field, fresh samples are to be returned to the room in time for processing and analysis. Use a glass bar or break the sample and quickly sample it

10, 10. Fresh samples are generally not suitable for storage and, if temporary storage is required, they may be packed into plastic bags, contained in tight bags, placed in freezer rooms or frozen. 4. 2 wind dry samples are processed and stored from the field in a timely manner on a thin layer of the sample plate, with natural wind drying in a clean indoor ventilator, strict exposure to the sun, and care to prevent contamination of gases such as acid, alkali and dust. Wind-dry samples are often used to flip soil samples and crush large blocks to accelerate drying while removing intrusions other than soil. The soil sample following the drying of the wind is sifted in accordance with the different analytical requirements and is fully mixed and placed in the sample bottle. Each of the labels inside and outside the bottle indicates the numbering, sample location, soil name, sample depth, sample particle size, sample date, sampler and sampling time, sampler, etc. The ready samples should be stored in good order to avoid sun, high temperatures, dampness and contamination of acid gas. All

11. Once the analysis has been completed and the analysis data has been verified, the specimens are generally kept for periods of three months to six months for reference purposes. Samples requiring long-term preservation shall be kept in a wide vase and sealed with wax. 4. 2. 1 treatment of general chemical analysis specimens and storage of dry and dry samples on the template, crushing with wooden or plastic sticks, and removal of invasive and newborns such as plant residues, stones, etc. Cleared, small broken plants must have roots and can be eliminated by electrostatic adsorption. All crushed soil samples must pass a 2 mm sift, and all unsifted earth particles must be recaptured until all samples pass a 2 mm sift. A 2 mm sifting sample of soil can be measured for ph, salinity, exchange performance and effective nutrients. Part of the earth will continue to grind through the 2mm sifting in a four-dimensional manner, allowing all of it to pass the 0. 25 mm sift for the determination of organic matter, conservative composition, whole nitrogen, calcium carbonate, etc. It will be sifted by 0. 25 mm

12. Part of the earth sample continues to be trimmed with manau, using a four-point method, so that it is fully sifted through 0. 149 mm for the full quantity analysis of minerals, etc. 4. 2. 2 the treatment of trace element analysis specimens and the treatment of soil samples used for trace element analysis are similar to the general chemical analysis samples, but special attention is to be paid to the sampling, wind drying, grinding, screening, transport, storage, etc., without exposure to metal appliances that may cause contamination. Examples include the use of wood, bamboo or plastic tools for sampling, sampling and screening over the nylon network. A sample of 2 mm nylon can be used to determine the effective state trace elements in the soil; a portion of the sample is derived from the 4th fraction of the 2 mm sift and is further fined with manau, so that it is fully sifted through 0. 149 mm nylon and used to determine the full amount of trace elements in the soil. Processed samples should be kept in plastic bottles. 4. 2. 3 the treatment and storage of particulate analysis samples crushes wind-dry soil samples repeatedly and sifts them all through 2 mm. The gravel mass percentage is calculated by retaining the gravel amount left on the scavenger, while the sifted sample size is used to compute the mass percentage of the gravel, which is then commingled into a wide mouth bottle for particle analysis and other physical properties. If there are iron-drilled nodules, lime nodules, iron or semi-ventilated bodies in the soil, they cannot be crushed with wooden sticks and should be carefully identified for preservation. References iso 10381-6: 2009 soilquity-sampling-part 6: guidonthecollection, handlingandstorageofsoilderaerobicconditionsfortheassesmentofm

 
ReportFavorite 0Tip 0Comment 0
>Related Comments
No comments yet, be the first to comment
>SimilarEncyclopedia
Featured Images
RecommendedEncyclopedia