L2715dw printer zero drum method
Step to zero l2715dw printer selenium
L2715dw printer, attention given to zero selenium drums
L2715dw printer selenium drum replacement
Maintenance and maintenance of the silt drums of l2715dw printers
L2715dw printer selenium drum treatment
L2715dw printer recycle and reuse of selenium drums
Introduction to l2715dw printer selenium drums
The aluminum drums of the l2715dw printer are an important print material for the transfer and printing of ink. Selenium drums usually have a longer lifetime, but as the number of uses increases, their lifetime decreases. When the life of the drum expires, the printer suggests that the drum needs to be replaced。
L2715dw printer zero drum method
The clean-up of the aluminum drums of the l2715dw printer was achieved through the replacement of a counter inside the printer. When the printer detects the end of the life of the drum, the use of the drum is automatically discontinued. In practice, however, the life of americium drums is not completely exhausted, and their useful life can therefore be extended by means of a zero count。
Step to zero l2715dw printer selenium
Zero l2715dw printer herbs are as follows:
1. Open the front board of the printer and remove the selenium drum。
2. A small hole can be seen on the side of the aluminum drum, shorting one of the copper wires with a conductor。
Gter's tip。
Release the power button and pull out the copper line。
Re-installation of selenium drums and closing of the front panel。
6. The printer's selenium drum counter has been cleared and can continue to be used。
L2715dw printer, attention given to zero selenium drums
Following the clean-up of l2715dw printer selenium drums, the following needs attention:
1. Zero selenium drummeters do not represent an indefinite extension of the life of the silt drums and are recommended to be replaced in time for their useful life to expire。
2. Zero selenium drummeters may affect printer warranties and it is recommended that this not be done during the warranty period。
3. Zero selenium drummeters are a technical operation that is recommended to be performed by professionals。
L2715dw printer selenium drum replacement
L2715dw printer selenium drum replacement steps
1. Open the front board of the printer and remove the old selenium drums。
2. Remove selenium drums and remove protective plastic bags。
3. Installation of new selenium drums and rotation in the direction of arrows on the selenium drums, and locking of straight-card slots。
Close the front board。
Maintenance and maintenance of the silt drums of l2715dw printers
In order to extend the useful life of l2715dw printers, the following maintenance and maintenance may be noted:
1. Avoid low-quality ink or cartridges。
2. Regular cleaning of dust and impurities inside printers。
3. Avoid the long absence of printers。
4. Periodic printer cleansing and calibration。
L2715dw printer selenium drum treatment
L2715dw printers are e-wastes and require environmentally friendly treatment. Selenium drums can be handed over to qualified recycling facilities for recycling and disposal without being discarded。
L2715dw printer recycle and reuse of selenium drums
L2715dw printer selenium drums can be reused, such as ink recycling and reuse. At the same time, selenium drums can be sent to specialized recycling facilities for recycling and reuse to reduce environmental pollution。
