1 methods and steps for measuring the pressure of the cylinder in the pressure table
How and how to measure the pressure of the tank. Look
The gas tank pressure table is used by:
1. Discontinuation of the preheating engine, removal of the spark plugs and the use of some attachments to connect the gas tank pressure table to the spark plug threaded hole of the gas tank cover
Transfer the oil door to full open position and press the start button until the cylinder pressure table ceases to rise
3. Read the maximum compression pressure in the cylinder from the table. The average of the two to three repeated measurements is the compressed pressure in the cylinder. The pressure table for the cylinder consists of two parts of the instructional body and the measurement component, and the compressed gas in the cylinder when measuring large diesel vehicles moves into the spring tube of the instructional body by connecting the head, connection tube, two connections, duct parts, valves and the main interfaces, thus moving the end of the gas tank into the spring tube of the instructional body. Passes to the central gear via a chained fan gear that rotates the pointer to indicate the pressure on the dashboard。
What's the reason for the low pressure of 2 cylinders
What's the reason for low tank pressure
Briefly, the reasons for the low pressure of the cylinder are:
1. Leak between the gas tank cap and the gas tank
2. Leaks between the pyrotechnic seal and the gas tank cap or the depressure valve
3. Leaks in rotors
4. Leaks caused by piston rings and gas cylinders severely worn or piston ring cards killed. Diagnosis of low tank pressure is:
1 the engine is unstable, the exhaust pipe has an audible or the oil tanker has returned fire
2. The difficulty of initiating cold vehicles without significant changes in the slopes
3. The vent discharges water beads out of the vents, and water leaks into or out of the tank in which the oil is returned. A cylinder is a cylinder metal that directs the piston into a straight-forward movement inside the tank and is divided into a single-action cylinder, a double-action cylinder, a film-form tank and an impact tank。
