It's the end solution of the notebook
Foreword: this is about the dissipation of water cooling, not the diy program. Please don't bite me if there's a misunderstanding
The notebook was also purchased in 2012 when it was not known that a good mother like zhang was doing her best to save money for us. And then i saw the configuration and model online, and then i went to guangzhou, and i ran into a js contact and said that i had the goods, and then for half an hour i said you wanted to buy what you wanted, but i couldn't write it.
The notebook was used until the end of last year, the memory of 2g went up to 6g, and ssd changed it, and the u3 of naho i3 was so weak, i couldn't even imagine, using the pc in the house, which i used as a card after an update of a large version of my father's book。
"hello, sir, because your graphic card model is so new, the software is not suitable for your graphic card type. You can try to unload your graphic card and use it."
I'd have put up with it if i had a series of nine, and i'd have told me that the model was new... And that the big company was great
So i looked at a lot of u-changes and changed a cpu for i7-2670qm. I thought i'd be relieved if i changed u, and it turned out to be too young
Watch the load on the right, 40%, december... How it's going to survive in the summer. After excluding the cpu installation, the silicate coating is sure to be okay, it's really hewlett-packard's constant problem - dissipation
If this is not the case, then the solution will be an external one, beginning with an analysis of the two main heat solutions that are in the mainstream:
I. Substrate radiators
It's gone, and you know it, but it's all used to assist with heat dispersion through the fan at the bottom. But reality is cruel, and one part of the wind in the bottom is actually just a d-shell in the notebook, and the other part of the wind that goes inside the machine is not very good. The deadliest thing is the ash of the radiator fan... And after a while, you'll feel the wind is going to be worse than a day...
Ii. Wind-scatterers
This is because my laptop's heat vent is behind it, which means that when the screen is open, it covers the heat vent, and it is not physically experienced, but according to the assessment, the vast majority of wind-drawn wind can guarantee circulation within the machine, and the heat-dissemination is certainly better than the bottom seat, but the problem with the wind-pacing is noise (or is the version improved now?) and the picker model. There's nothing wrong with the noise, but there's nothing we can do。
It can be seen that the mainstream thermal solution has nothing to do with this machine, that the base seat has nothing to do with a machine that has soared to 90 degrees in winter, and that it was simply useless because of its structure. And then suddenly, when i think of the water cooler of the desktop, i'm really trying to find out what's going on with the "cooled notebook" and there's really one who can send the notebook to the seller's place for refitting it, and it's still local... And it's really a big ape shit. So i drove the notebook。
It's a box of foam, and it's cold inside, and it's safe. Figure
As can be seen from the figure, empty copper tubes that can flow liquids are welded on the original thin copper pipe, and then two small holes in the vents of the machine can be physically destroyed, so that the copper pipe can be stretched to the outer water-cold plastic tube. So it is important that you consider whether you can accept the destruction of the machine and the presence of a small copper tube. And then the oven shows you a temperature comparison
This picture is to turn off the outer water, it's cold, it's cold, it's hot
This is what happens when the cooling starts at 92 degrees, and the cooling curve can see that it's basically cooling in 2-3 seconds, and then stabilizing between 70-68 degrees
Then we shut down the temperature test, and the temperature continued to decline, reaching normal usage levels, and temperatures ranged from 55 to 60 degrees
But there's no perfect thing in the world
The outside water is cold, and there's a bottle to compare the size
This is the outstretched copper pipe, which can be removed, followed by a couple of black plugs, so dismantling is not a problem。
A total of 420 oceanes were retrofitted with very good results, but the shortcomings were equally evident. First of all, if you want to know if your laptop needs no portables, then you're trying to get a mainstream fan, like me, to upgrade old ben's power and heat-dissemination system. There's no way the heater can fix this。
It's only a small solution, but there's a little bit of heat dissipation when old notebooks or notebooks are upgraded, and you can choose it when your notebooks are fully adequate for office needs but the heat is confused with you, if you consider that your porting requirements for notebooks are not as big as that, the heat dissipation effect is definitely terminal。
... And the king of qin
