The electric pusher is a new type of electric implementing agency, and the electric pusher is mainly a new type of straight-line implementing agency consisting of such bodies as electrics, pushers and control devices that can achieve remote and centralized control. The electric pusher moves to and from a given range of journeys, and the normal electric pusher standard travels at 100,150,200,250,300, 350,400 mm, and special journeys may also be designed according to different application conditions. Electric pushers can be designed for different thrusts based on different application loads, typically with a maximum thrust of 6,000 n, with an empty run speed of 4 mm ~ 35 mm/s, and electric pushers are powered by 24v/12v direct-to-range magnetic electrics, which transform the rotational motion of the electric machines into a straight-to-reway motion. • promotion of a set of interlocking agencies to complete the switch between wind doors, valves, gates, barriers, etc. The use of electric pushers as implementing agencies can reduce not only the gas source installations and assistive equipment required for the use of an implementing agency but also the weight of the implementing agency. Aerodynamics implementing agencies need to have some pressure throughout the control operation, and although small-volume amplifiers, etc., can be used, the amount of gas consumed is still enormous. The introduction of an electric pusher implementing agency, which needs electricity to change the opening of the control and can no longer supply it at the required level, has a clear energy-saving advantage in terms of energy efficiency. It applies to long-range manipulation and is widely used in such sectors as wind doors, valves, gates, material handling, traffic control, etc. It is now being used by a growing number of sectors to replace the automatic devices of institutional hands, hydraulic valves, speed-reducing transmission agencies。
