One lock and three drawers can't be fixed
Three drawer locks? Easy, this is common, usually due to wear and tear caused by prolonged use or to the mislocation of some small components. Next, i'll teach you a few tricks
The reason i can't lock the drawer
Long loads and frequent openings of drawers may result in slip-track wear and tear, deformation, or a shift in the position of the chain of closed institutions, thus preventing the drawers from being locked or closed. These are common causes。
How to fix the slide
The slide is the key to the smooth opening of drawers. If the slip track is worn, an attempt can be made to replace the longer iron self-absorption screws; the slide track deformation is carefully corrected with sharp cones. Remember, minor damage can be dealt with like this, if it's severe, or if it's just a new slide
Adjusting the pole to solve the locking problem
If the pole is not in the right place, the drawer won't be locked. At this point, you need to check the connection between the pole and the lock rotation pole. I used to use it as a tool to adjust the position of the chain gently until it worked perfectly with the lock. That way, the drawer will be locked
Quick-track small processing techniques
Sometimes the problem is not that complicated. For example, the drawer is just a little tight, so you can try to take the drawer off, put a little plier on the side of the slide, or adjust the screws of the drawer. These little moves tend to have unexpected effects
Well, don't you think it's that hard to fix the drawer lock? Next time you have a similar problem, try it yourself! If you have any other life tricks, or any problems with a drawer, please leave a message in the comment area
