The more computers run, the more they get problems, sometimes we have toReload systemThat's how it works. But sometimes the computer re-assesssssing system, but it's not optical, sometimes it's difficult to run around with a light disk, and actually we can re-assemble the system with a flash drive, and it's easier, but many people don't know how to re-assemble the disk, and today we're going to give you a detailed description of how the disks dos start, hoping it will help you。
How do you make the u-dos starter
We're making dos-starters on a disk, and we're going to make sure that our computer supports the drive, and we're going to have at least a two-g drive, and we're going to download usboot on our computer before we make it, and we're ready to do it。
Step one: we need to back up the drive, because we'll format it when we make the startup. We download usbot. Exe, we depress, and then we plug our flash drive into the computer。
Step two: we pick our flash drive, then click on the blue sub-working mode, we choose the zip mode, other models may be wrong, and we have to choose the zip mode。
Step three: we click on the model and then we can make it。
Step 4: if a warning is made that this operation will be reformatted, all data will be destroyed, let's continue when we choose. We make sure that the data in our disk is not available, and then the choice is。
Step five: there's a hint in production that lets us pull the drive, and we need to pull the drive in accordance with normal procedures. In general, it is possible to pull down directly if it is win2000, xp, or win7, but if it is win2000, xp, or win7, we need to double-click the red circle on the right side of the task column to safely remove the hardware and unload the disk。
Step six: when we plug in the disk, we'll have a pilot drive, which means we can start the basic dos。
Step 7: we'll put all the files that were downloaded from maxdos under the root directory of the disk. We plug the u disk into the ub interface on the main panel and then restart the computer, and the computer system self-inspects the interface and enters the bios, then set into the bioos features settup, and set the start order to usb-zip, which is the same as our u-disk pattern. When set, press esc and then select save and exit save settings, and press back to confirm exit from the bios settings。
This is how to create the entire dos starter for the disk you have described, and we can see from the above that the method of making it is simple, as long as we operate as one of the steps described above, it will be easier to reload the system using the disk, and it will be faster to copy the information, and if you need to reload the system often, you are advised to use the disk reloading system, which is best backed up with something important on the computer, so that the reloading system is not lost. I hope this will help you。
